Comment
Thanks for the reply, I have a customer wanting a high gloss on a table in the near future and will give this a try. Ive been using polycrylic and just not getting that kind of gloss
It has 5 coats of Varathane Polyurethane on the top of it. I used the kind intended for toys and such. It is supposed to have a harder finish. I was quite liberal with the coating and let each coat cure for the designated time and then reapplied. The rest has 3 or so coats. It is very glossy, but not as much so at the epoxy finish I did on my other table (pictures are on my page). This table finish with the polyurethane is quite a bit less expensive and looks good also however. Here is a link to the product I used http://www.rustoleum.com/product-catalog/consumer-brands/varathane/...
how did you apply the finish to get that high gloss look?
Beautiful! Love the finish!
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community