queen ann table unfinished
Comment
-
Comment by Jenny on January 20, 2010 at 11:41am
-
Kevin - I just noticed your queen ann table blog. I thought I would put a link to it here for other people that are interested in this picture.
-
-
Nice! Thanks for sharing. Ok, now steam sauna is on my list of projects. :)
-
Comment by Kevin P. Thornton on January 20, 2010 at 1:04am
-
There is a picture of the jig that I made on my page. I have a steam sauna and I used red oak quarter inch thick wood. And I put the wood in the steam sauna for about an hour and a half. Then I went in with my jig and bent the wood around it and then glued it up and clamped it to the jig with about 20 clamps and let it sit for a day.
-
-
Can you walk us through how you made this one? How did you use your Queen Anne’s jig? How did you make that curved top rail? It is a beautiful piece.
Need Help?
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
Popular Posts & Projects
Videos
Forum
Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
40mm Cup Hinge Jig Question
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
Product Reviews
New Kreg 720Pro
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Not Pleased With Pocket Hole Construction
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep.
Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community