Pub Chair
Comment
-
Comment by Steven Towne on January 14, 2011 at 8:28am
-
Thanks, it really wasn't to hard to build. My biggest issue on this project was that the table saw I was using kept going out of spec. There are no trunion adjustments on the front or back of the blade. I ended up buying longer bolts and coating them with locktight. The spec calls for .003 var between front and back and it was going out by three times that. Let me know if you want some general measurements to built one for your man town..
-
-
That is nice, I need to do like you and buy one and make the rest. Those would look good in my man town.
-
-
At least one or two has been enjoyed to date. I didn't really need three chairs I just wanted to see if I could make one based on just the measurements from the other. The cloth material was more expensive than the lumber.
-
Comment by ray vile on January 12, 2011 at 4:03pm
-
Like them chairs...looks like a comfortable spot to sit and enjoy an adult beverage or two
Need Help?
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
Popular Posts & Projects
Videos
Forum
Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
40mm Cup Hinge Jig Question
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
Product Reviews
New Kreg 720Pro
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Not Pleased With Pocket Hole Construction
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep.
Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community