Pegboard Shelf
All 4 shelves I made - 3 along top and one is lower left. I put L-hooks on 2 of them. They are very strong - that is an 18" pipe wrench hanging from one of them.
Views: 286
Projects: Pegboard Shelves
Favorite of 1 person
-
Comment by Joseph M. on August 24, 2010 at 11:09am
-
Yes the ends of the hooks would have to be worked. They will also will need to be evened out as each one is not exactly the same height. Rubber tips could be purchased but I think it would change the look - will look store bought, not custom. Maybe, a different type hook altogether. Gold even.
-
Comment by Ryan Bruzan on August 23, 2010 at 8:02pm
-
Using those hooks you have for ties may require either filing the hook tips smooth so they don't snag the tie or find some caps or dip the tips in Rubber Dip.
-
-
lol didn't think of that Ryan. Might consider making one for belts and tie's also!
-
-
You see a tool rack, I see a belt and tie rack! One of those would look nice painted in my built-in closet to hold all the belts and ties I never where in the workshop.
-
-
Thanks guys.
Need Help?
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
Popular Posts & Projects
Videos
Forum
Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
40mm Cup Hinge Jig Question
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
Product Reviews
New Kreg 720Pro
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Not Pleased With Pocket Hole Construction
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep.
Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
