Kreg Owners' Community

This is my screw and accessories storage. I will use the top storage bins for plugs, spacer blocks, face clamp covers, extra step drill bits, and #2 Sqaure drives.

Rating:
  • Currently 5/5 stars.

Views: 3501

Comment

You need to be a member of Kreg Owners' Community to add comments!

Join Kreg Owners' Community

Comment by Jeetender Paul on April 13, 2010 at 5:11pm
Thanks for replying. Its a shame its not available in the UK. I've had a look at various sorts of similar products here in the UK but they all appear very flimsy & don't' appear as good. Once again thanks for your replies James and Michele.
Comment by James Pratt on April 13, 2010 at 4:42pm
Jeetender, Sorry It appears that these are only available at the Home Depot's here in the US. Although after some research I did find some other alternatives at the B&Q's in the UK. http://www.diy.com/diy/jsp/bq/nav.jsp?fh_view_size=10&fh_reffac...
There is also some options through EBAY UK http://shop.ebay.co.uk/i.html?_trkparms=65%253A12%257C66%253A2%257C...
Hope this helps.
Comment by Michele Lejeune on April 13, 2010 at 4:15pm
Hi, again! I just came back from Home Depot where they had at least a half dozen in stock (less the one that I bought, of course! LOL!) I LOVE IT! Michele
Comment by Jeetender Paul on April 13, 2010 at 1:51pm
does anyone know if this is available in the UK. I've searched the net and am unable to locate a dealer.?
Comment by James Pratt on April 13, 2010 at 12:43pm
Michele good info. Charles, the cups on the bottom are large enough to hold approx 300-500 screws depending on the size of the screws. Of coarse with the longer screws (2" - 21/2") it is the lower end and that is propably why Kreg also sells them in smaller quantity packs. I have 300 in each of the smaller sizes and as you can see in the picture above, I can probably fit another 200 or so. From the picture above you can also see none of the cups are completely full or even covering up any of the lables. If you do put labels in them, as I did you may not want to fill them up all the way as they may cover up any labels you use. Good question Charles.
Comment by Dan Fiorito on April 13, 2010 at 8:58am
Thanks Michele! I too am chronically DIS-organized, but my wife seems to call it LazySOB Syndrom... I don't know... lol
Comment by Michele Lejeune on April 13, 2010 at 8:04am
Hi, everyone! I'm a newbie so all of this information is super valuable to me and I thank you all for it! I was especially intrigued by this great organizer box (especially since I've been chronically DIS-organized virtually all of my life!) so I went to the Home Depot site to find it.
http://www.homedepot.com/h_d1/N-5yc1vZ5zd38/R-202021301/h_d2/Produc...
It should be noted, however, that unfortunately this item is NOT available for online purchase (see Dan and James' comments) but they WILL order it for you. Just take your printed page from the link above to the Customer Service desk and they'll take care of it. You may have to prepay, though.
Hope this little addition detail helps out, too! Best regards, Michele
Comment by Charles M Baker on April 13, 2010 at 7:59am
About how many screws with the ben's hold?
Comment by Dan Fiorito on April 13, 2010 at 6:25am
Thanks James! I checked online and they don't seem to have it in Minneapolis, but they may still have it in the store, plus I can check a few others while I'm there. The real reason usually hit Minneapolis to visit my folks, but end up spending most of my time at Rockler which is just down the road (I'm the guy pressed up againts the window drolling). I'm sure I'll find it, if that fails, then we need to convince Kreg to build one like that! (of course we will all get a nice comission from them for doing so, more Kreg stuff!)
Comment by James Pratt on April 12, 2010 at 11:22pm
Dan, I hope you find it when you go. If it is to far to travel, here is the online link http://www.homedepot.com/Storage/h_d1/N-5yc1vZ1xgtZas7e/R-202021301...
I do not know much about if they ship to Canada but best of luck to you.

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_