kokopelli gate front
An indoor dog gate with southwest kokopelli design on front and gecko on back. It was given a distressed look and hung with double action hinges to allow easy walk through.
Views: 109
Projects: Pet projects
Comment
-
Comment by Ron Lane on April 11, 2010 at 8:48am
-
Hi Anthony and Jenny,
thank you for the comments and question if a dog could push through it. A large dog could go through it just as we do. Our three medium sized (40 lbs) have never tried. They get to the gate and just do not even try to go through. If cat runs under and dog bangs into the gate he might learn to open it. The resistance on the hinges can be tightened up to further discourage a bigger dog.
Ron
-
Comment by Jenny on April 6, 2010 at 10:03am
-
Ron, what a beautiful solution. Does the saloon door hinge give enough resistance that the gate does not need to be latched in order to stop the dog?
I have added this one to the Pet Projects album
-
Comment by Anthony Lanting on April 6, 2010 at 6:53am
-
Great looking project- want to build me one for our SW-themed den? I don't understand the "dog gate" reference though...how does it stop a dog? It would only slow our Golden down slightly as the cat runs under it.
Need Help?
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
Popular Posts & Projects
Videos
Forum
Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
40mm Cup Hinge Jig Question
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
Product Reviews
New Kreg 720Pro
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Not Pleased With Pocket Hole Construction
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep.
Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community