Mark Eaton and Gary Striegler from Kreg and many owners have these boards I decided to make one for my new K5 Jig which is the best of the 6 I own I seen things on the others I wanted to improve wich I think I have done. Four rare earth magnetics hold the vacuum pencil and screws at the front, I found the vacuum hose would start to separate if it bottom out on the side of the jig thus the riser. I went to four suppliers looking for another router stop none had any I bought the one I had at a wood show years ago will be looking for another one for the left side but showed with another riser how you could use a old plastic stop. Everything is anchored with 8- 32 screws and t nuts so nothing sticks out the bottom so the base is supper stable , and with the rubber will not move. Added the handle to make it easy to pick up and take to a jobsite.
Hope it give some people some ideas.
Tags:
Projects: K5 Portable Board
Favorite of 1 person
Comment
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community