Comment
Do you have the staining schedule that you used? That's quite a feat to accomplish that color on maple. I'm in the middle of building a built in style bookcase in my office and I worked on a stain for a week trying to get it dark enough. I have it to a mahogany color now. ( you can see the small sample I made in one of my photos). Any help would be great!
Thanks Jim, I really appreciate it. I used the Kreg pocket jig for assembling the faceframes and to attach the faceframes to the cabinet carcass. The tops, bottoms and back are set into dados that are glued and screwed from the outside and to cover the screws I laminate a piece of ply (whichever species I'm using for the fronts) to the sides that can be seen with contact cement. I don't have plans, but I could surely draw something up for you. If you check my page you will see some more photos of how my cabinets are built.
Man Justin, they are some nice cabinets do you have any step by step plans? How much were you able to do with jig curious, need to make 2 complete sets and vanity's for our main home and rental property am fixing to flip. Then rebuy do it again and again, so for these and future houses my wife and l and our son do would like to try to maker high end cabinets like yours l will learn by my mistakes as l go. thanks jim
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community