Kreg Owners' Community

Rating:
  • Currently 0/5 stars.

Views: 517

Comment

You need to be a member of Kreg Owners' Community to add comments!

Join Kreg Owners' Community

Comment by Gary roofner on July 11, 2011 at 11:12pm
You are right Stanley pearson for mine it is a 1 1/2 inch and I did find the proper adapter at home depot. However the pickup is not great with my gmc slider . Not sure if my 4 hp sears vac is the problem or poor port on the gmc. I suspect both.
Comment by Stanley C. Pearse on June 11, 2011 at 12:04pm
Hummm....I would measure again.  Go to the Rockler.com web page and plug in part number 42248 or 42252.
Comment by Jens Jensen on June 10, 2011 at 2:59pm
No I have a odd ball outside port is 1-5/8  Some one said Ridgid vac uses a 1-5/8 to 2 1/2.If I cant find it I guess I will make a chute for it.Thanks
Comment by Stanley C. Pearse on June 9, 2011 at 11:09pm
The diameter that you need is 1-1/4" not 1-1/2" as I thought above.  Look at the Shop Vac Dust Fitting adapter for 1-1/4" to 2-1/4", http://www.rockler.com/product.cfm?page=21713&filter=vacuum%20f....  The adapter actually goes inside the port - not over it.  Lowes, Home Depot or Sears may have what you need as well.  Hope this helps.
Comment by Stanley C. Pearse on June 9, 2011 at 3:26pm
I beleive that it is 1-1/2" but will confirm when I get home and re-post.
Comment by Jens Jensen on June 8, 2011 at 3:36pm
what size is the hose ends for Bosch I have a trasdesman and I cant find a hose to slip over the port side of saw

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_