IMG_1640
Here are a series of photo's of my "mobile" workshop set up on my driveway. This was the first time I used the Kreg finish frame clamps. Can anyone tell me the "trick" of preventing the clamp from popping open?
Views: 981
Projects: My Mobile Workshop
Location: Novato, CA
Comment
-
Comment by RCW on April 30, 2012 at 11:38am
-
What do the neighbors think about it?
-
Comment by David Dean on April 29, 2012 at 11:24pm
-
nice setup I dont now about the other's but Ilove working out side in the frash air.
-
Comment by R. E. Woods on April 29, 2012 at 10:53pm
-
While I don't own that clamping setup I know that with most "vise-grips" it's a matter of adjusting the rear screw to the proper pressure. It can be tricky. Too much pressure and you could damage the object and have a real hard time closing the clamp. Not enough pressure will cause the clamp to pop open. I would try a little more tension where it takes a little effort to close the jaw of the clamp.
Need Help?
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
Popular Posts & Projects
Videos
Forum
Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
40mm Cup Hinge Jig Question
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
Product Reviews
New Kreg 720Pro
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Not Pleased With Pocket Hole Construction
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep.
Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community