I kept tripping over my cords and I remembered seeing something like this in a magazine I had read. I repurposed the old curtain rod I was going to throw away and having the cords off the floor has worked out great!
Tags:
Projects: Workbench
Comment
Hi Dan - I'm sorry to say that I don't have any plans. I just started with the cabinet face frame and built a frame for it. You can view some of the photos "workbench beginning". I built a solid platform for the bottom from a melamine door from an old cabinet and put wheels on it. Then built the cabinet and put on top of the platform. Then built the shelves, drawer in the middle, and top. Hopefully the pictures will help you. Let me know if you have any questions. Thanks for your interest. Have a great day! :)
Is there any plans for this that can be built from great job
What a great idea, Lorrie! I like the open shelves on the workbench too - accessible horizontal surfaces are a must! :)
So many cords, so little room. Now you won't be tripping unless you on vacation. :)
Good idea.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community