Endless Knot, Large
"Endless Knot" large size (38" x 30") Vermont Maple and Walnut finish
Views: 220
Comment
-
Comment by james wilhelm on December 20, 2012 at 9:38pm
-
Craig , very nice design and detail , a real eye catcher , well done and thanks for sharing !!
-
Comment by Craig Diamond on October 21, 2010 at 8:08pm
-
No specific plans. I figured it out as I went. This is based on 3" increments. So, each of the small squares created within the figure are 3"x3". I used the Kreg Jig for the 90 degree holes on the back and the Jr. for the angled pocket holes. Precise measuring and cutting is essential for it to piece together correctly. My advice is to measure twice and cut twice!
-
Comment by Joe Massena on September 29, 2010 at 6:26pm
-
Do you have plans for this?
Need Help?
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
Popular Posts & Projects
Videos
Forum
Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
40mm Cup Hinge Jig Question
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
Product Reviews
New Kreg 720Pro
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Not Pleased With Pocket Hole Construction
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep.
Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community