DSCN0087
Comment
-
Comment by Erin O'Leary on February 12, 2013 at 10:07pm
-
Thank you, Henk. I'll keep your tips in mind for my next project!
-
Comment by Henk Rietveld on February 7, 2013 at 3:21pm
-
Hi Erin;
Nice job, and excellent suggestion on the finishing. The Minwax pre-treatment is excellent for pine. I have had great success with the laminated (side-to-side) pine panels from Home Depot. Another stain that I have used to good effect in Benny Moore's Sherwood. Takes a bit of getting used to, but can be used to give various darknesses of a luscious brown stain. Then finish with 3 or 4 coats of water based satin Varathane - wonderful stuff to work with.
-
-
Thank you, Scott. The wood is all pine. I used a wood conditioner first, then one coat of Minwax English Chestnut Stain, then 4 coats of semi-gloss polyurethane.
-
Comment by Scott Adams on January 29, 2013 at 1:26am
-
Hey Erin, Nice coffee table, Love the finish!! What colour is this??
Need Help?
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
Popular Posts & Projects
Videos
Forum
Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
40mm Cup Hinge Jig Question
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
Product Reviews
New Kreg 720Pro
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Not Pleased With Pocket Hole Construction
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep.
Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community