Comment
Thanks for the details Mary, have a Merry Christmas.
Jeff, I made the crates myself. I just drew it up on graph paper and kind of guessed the proportions. The sides are all cut from 1x8 boards. The bottom of the crates are 4 - 1x3's. I used lathe for the sides. The bottom crate is upside down. The top one stands on it's end. I am attaching some pictures that might help you to build it. It was easy once I built the first one. I did have to screw a few of them together to make it stand up nice, but the crates can be easily taken down later and used for something else!
Nesting Wine Crates.
(Nesting optional---but does facilitate storing)
Simple construction.
Chose a size that facilitates your desires, or,
make the largest crate to accommodate (4) 1 gal milk jugs, with the crate opening "UP" and the milk jugs "upright".
2x2 for the inside corners. (TIP: 1"x1" chamfer one verical corner).
Slats 1/2 x 2 or 1x2
1" spacing between slats.
Joinery: butt joints and 2" brad nails
Great idea, I would love to build this for my wife next year.
Could I ask about the crates, what or where do you get the plans?
Mary O love this, what a grand way to show off your Christmas items and save a tree.
Thanks, it was so much fun to make!
Michael, I actually built all the crates...so, no wine :(
Mary brilliant idea ,showing your artistic side ,Mary were they wine crates ? If so what happened too all that wine ha?
wow soooooooooooo cool
Mary , great Idea , very nice, thank,s for sharing , Jim !!!
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community