Completed
Comment
-
Comment by Joseph M. on October 24, 2010 at 9:43am
-
The hardboard is at the same level as the table. you only have that small depression on the right.
-
-
-
-
Very nice cabinet. About the Ryobi tools - I also have them and use the table saw. It cuts great however as you mentioned there is a problem with the clearance plate. Initially I added two washers under it because it dropped lower than the table. It helped but you still have that big gap and cannot cut small pieces safely. I managed to create a zero clearance plate out of 1/4" hardboard and it works great. There is still a small depression but its alot safer. I will come back with a photo.
-
Comment by John A Cason II on September 30, 2010 at 9:45pm
-
the band saw for ryobi is awsome. the table does really well. when cutting on the side that has the red plastic peiece by the blade can cause a slight angle on the wood. but for anything bigger than 1.5 inches you are good to go. i have not had any issues with ryobi tools and they have preformed pretty well for me so far...that and you cant beat the price. vasil i will send them here shortly. i have them in sketch up
-
Comment by Doug Fish on September 30, 2010 at 5:52am
-
Another excellent project! By the way, I notice that you have a lot of Ryobi tools and I was wondering how you feel about their performance, in particular, the bench top band saw? Would you purchase it again? I have mostly Ryobi tools and they have performed well and I need a bandsaw. Thanks.
-
-
I realy like it too,also I think you did a realy great job if you don't mind can you send me the plans here is my E-mail vmmacman@yahoo.com and Thank you.
-
-
You can send it to al@cfl.rr.com Thanks
-
-
Al, i do have the plans in google sketchup. if you would like i can email them, just send me your email and i will get them out. i do believe i have a cut list for it too still.
-
-
I really like this project, are there plans available?
Need Help?
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
Popular Posts & Projects
Videos
Forum
Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
40mm Cup Hinge Jig Question
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
Product Reviews
New Kreg 720Pro
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Not Pleased With Pocket Hole Construction
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep.
Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community