I basically followed the Kreg plans and incorporated some other ideas that I saw elsewhere. I watched Jeff Devlin's video a few times before I started which was very helpful. I am definitely a beginner so it's not square, but it works!! My brothers even thought that is was a good job!! And they don't say anything nice! They don't think women can do woodworking! LOL! YouTube videos and books have been a great help to me because I don't have anyone around to teach me. Wish there were classes to take. I really like this hobby!!
Tags:
Projects: First Workbench
Favorite of 2 people
Comment
where are the plans for that bench? looks great!
Chrissy,
A continuous edge band on each side isn't necessary,
however; it would be nice to have it one piece.
An alternate is to use shorter pieces.
Pine/fir would be acceptable for an edge band---I'd save the oak for another project.
Maple would be my choice over oak, for this project.
If using multiple pieces for the edging,
I'd make butted joints at 45 degree---
an alternate would be 90 degree joints---
45 gives it a better look.
I'd join the edge banding, using glue and dowels---
avoid screws, which may cause a potential problem, at a later date---
such as when performing such operations, as sawing, drilling, planning, chiseling, or the like.
I plan on putting the bandind around, but just haven't had a chance. I have left over oak but they are shorter pieces so I will still have to pick on a longer piece for the front and back. I will post a new picture when I finished that. Thanks for the suggestion!
Now how about some nice hardwood edge banding around the top? Easy to do and looks great.
JIgsaw blade selection---
No other company makes as many jig saw blades for as many applications as Bosch.
NOTE: The BladeRunner machine max blade length, that can be used,
is 4'', and a cutting stock thickness of 1-1/2''.
Also note, when using narrow fine-tooth blades for scrolling,
the blade will not be supported by the rollers, in the upper arm---
ie, the teeth on the blade will be set-back from the rollers, not giving the blade any side thrust support.
Hi Rick, the top is made of 2 sheets of 3/4 plywood put together.
Thanks Angie!!
Thank you, too Ken!! Great suggestions for the Blader Runner! I will try that blade out. I know that I will use it more, the more that I see it used, so I will be looking for some videos on You Tube. They were really helpful with the workbench and for the bookcase that I posted.
Any more suggestions, send them my way!!
yeah!!!
Chrissy,
Make practice cuts from scrap wood ---1/4, 1/2, 3/4 and 1-1/2'' material.
You'll need to make fine-tune adjustments, when setting up your machine.
Refer to the speed setting guide, enclosed in the manual.
Select a blade that is most suited for the material you're cutting.
Become familiar with the cutting speed and blade, for various materials the thickness.
You'll learn as you go.
Make a copy of speed chart, from the owners manual, and tape it to your machine,
so as to have ready access to it for reference, when making cuts.
(put the chart on a 3x5 file card, and secure it with transparent packaging tape to your machine).
''Speed and Feed'', is key to obtaining optimum results
Higher quality blades, other than what is supplied with the unit, can obtained from other sources.
You'll need to obtain some blades to make x-fine/smooth cuts, when making tight scrolling cuts.
I prefer Festool and Bosch jigsaw blades---they're performance is better than others I've used.
My preferred Festool blade, ''S75/4FSG'', features a cross-set tooth design, ideally suited for making very fast cuts in softwoods, hardwoods, melamine, veneered plywood, and chipboard, among many others---
as well as making some pretty tight curve cuts---approx the size of a quarter. Amazing performance.
Thanks, Ken. I did put the 2 x 4's under the top and under the bottom shelf. I just wanted to make sure that it was nice and strong. I don't know that they are 16" on center, but I do have 2 under the top and under the bottom piece.
As far as the Blade Runner, I am not yet comfortable with it. I have only tried to cut maple with it and the piece just bounces on me. I may not have the right blade it in.
Thank you so much for all the suggestions!!
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community