Comment
Building it now, thanks Jim
Angie, It's a window box not a planter box. It's meant to hold small flower pots.
If you want to fill it with soil you will have to close in the back of the box to hold the soil.
Thanks Jim, I've got a lot of 1x3's laying around and 1x2's...one last question...is the planter box lined, or did you make holes for drainage?
thanks for the great project, angie
Hi Angie,
The entire project is made of 3/4" cedar fence board but you can use anything you have hanging around. If you plan on painting it you may want to use older cedar boards that the oils have dried up or another species of wood (pallets are perfect for this).
The Stiles are 32”Long x 2 &1/4” Wide
Rails are 18” Long x 2 &1/4 Wide
There are five 1" wide Mutton bars. Four are 8 &1/2" long and one is 23” long
The Box is 4” High plus the 3/4 x 1" trim on top
The front of the box is 24" wide
The side of the box is 5" wide
The bottom of the box is 22&1/2" by 4&1/4" (you can also see on this picture that I installed a strip of scrap along the back of the box between the stiles to keep the pots from sliding back against the wall)
The Top accent piece is 24&1/2" by 2&1/4" with a 25 degree bevel cut on three sides
The french cleat is attached to the top rail and a spacer of the same thickness as the cleat is attached to the bottom rail to keep it level and also allow plants like ivy to wrap around the frame easily.
Have fun with it and change the dimensions to suit your needs.
what size boards are they? I read the instructions...still not clear, having a blonde moment i think
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community