Kreg Owners' Community

These were modified from Ron Hazelton's design, with pocket screws used for all joints. I debated using keepers for the slats on the planters, but in the end I used pocket screws to add to the strength and stability. Kreg deck jig used for the seats!

Rating:
  • Currently 0/5 stars.

Views: 883

Projects: Multi-level deck and gazebo
Favorite of 1 person

Comment

You need to be a member of Kreg Owners' Community to add comments!

Join Kreg Owners' Community

Comment by Derek Gould on June 4, 2015 at 2:54pm

Hi usmc;

I got the idea from one of Ron Hazelton's videos, which you can see here.

I changed a few things;

  • I used pressure-treated lumber for everything. Cedar is expensive where I live, and doesn't seem to hold up to the weather very well.
  • I used PT fence boards for the slats on the planters. I think these were 6 x 3/4; actual measurements 5 1/2 by 1/2. Mostly because that's what I had on hand.
  • I ripped the corner and top/bottom pieces for the planters from 2-by stock, actual size was 1 1/2 square.
  • I used pocket holes for all joinery, even for the verticals in the planters. In retrospect that was overkill, and I probably should have just used keeper boards, but then again the stuff has all been outside for 3 years and is still in perfect condition.

One thing I liked about Ron's plan was that you don't try to build any bottom in the planters; just use 2-by  and boards. This lets you set the inside height to whatever you want, depending on the height of the plant and container. Also, it lets water and everything else wash down through rather than collect, a problem with some other planters I've made.

With all the changes, I ended up having to come up with my own measurements, but that wasn't too hard. I made all the squares for the benches first, then completed the benches. Once they were done that gave me the finished height and width for the planter boxes.

Comment by usmc323nova on June 4, 2015 at 2:31pm

where can I find the design?

Comment by KregRep on September 23, 2013 at 7:52am

Awesome project and awesome view! Thanks for sharing, Derek!

Comment by michael evans on September 19, 2013 at 3:20am

Lovely job derek, and what a view.

Comment by james wilhelm on September 18, 2013 at 9:38pm

Derek, very nice looking bench and planters , well done , thanks for sharing, Jim !

Comment by Ken Darga on September 18, 2013 at 6:32pm

Nice.

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Pantry slides for heavy application

  Recently purchased two 96" tall pantry cabinets that are 23" deep that only came with two adjustable shelves and two fixed, (one at about 55" and one at the very bottom).  Shelf holes in the walls are drilled 2" O.C.  Like most store-bought…Continue

Tags: drawer, slides, pantry, pull-out, 75-Lb

Started by Paul Coon in General Woodworking Aug 11.

Miter Saw Recommendation 1 Reply

I’m looking to upgrade my miter saw. I’m willing to invest a good amount of money to get one with the precision pocket hole joinery requires. Would anyone like to offer a recommended model?

Started by Joe Racz in Beginners' Zone. Last reply by Scott Davison Oct 6.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 8 Comments

© 2021   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_