Comment
Jl , that is suppose to be 1 1/4 " blue coat screw,s !!
JL , very nice looking bench and table , look,s rock solid , like your design !! And you are right , a little glue never hurt,s , also you can get the 1 /4" blue coat at AMAZON , I buy them in 500 count boxes, hope this help,s ,a job well done , thank,s for sharing , JIM !!
This project was built with treated 2x4s and 1x4s. I ripped the 1x4s down to 3" because I liked the look. I did use the blue kote screws and glue on all joints. Because I couldn't find 1 1/4" blue kote screws, I used deck screws on the back. For the back rails, I used 1" decking and 3/4" pickets to give it depth. The joints came out strong, but gluing never hurts. If I had the HD jig I would have felt better about the overall project. The wood is soft and when wet, like it was, it is easy to overdrive the screws.
JL;
Like the matching bench great place to set the beer and burger or just your feet. Did You use any glue and normal screws or blue cote?
Thanks Jeff
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community