APTable3
Aurora's Table came about from experimenting with my K3 The pocket screws are underneath joining the perimiter together.
The top as you an see was made from off cut scraps
Views: 147
Projects: Aurora's table
Comment
-
Comment by Robert Brennan on October 18, 2010 at 12:02am
-
Hello Ray,
The top was firstly finished by the usual sanding process.
Then coated with Perfect Gloss.
perfect gloss a product of ATL Composites Pty Ltd.
www.atlcomposites.com
Its a 2 pack epoxy product self leveling, easy to use.
To remove any bubbles simply wave a gas torch over the surface, (carefully) and presto a really good finish.
P.S. The matching hexagonal top tray is on the gallery somewhwere as well it has a couple of pictures embedded in the top coat you may want to check it out also.
regards
Robert Brennan
-
Comment by ray vile on October 14, 2010 at 7:41am
-
what did you use that gave that top such a high gloss finish...looks great
-
Comment by Karsten on October 7, 2010 at 10:08am
-
Great surface finish!
Need Help?
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
Popular Posts & Projects
Videos
Forum
Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
40mm Cup Hinge Jig Question
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
Product Reviews
New Kreg 720Pro
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Not Pleased With Pocket Hole Construction
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep.
Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community