I combined in the workshop in the same device trash bBin and dust catcher.
Comment
Michael,
I have a similar looking cyclone made by Oneida Air Systems. Its called the dust deputy. I purchased mine locally from a Woodcraft store, but they are available on-line from a number of sources.
http://www.oneida-air.com/category.asp?Id={CC6B6F2A-E3D7-4F18-A53C-B5C357DFE131}
Mine hooks up differently though. The line from the tools goes into the side and the top line is the exit to the vacuum. My only complaint is mine empties into a five gallon bucket and I have to dump it every other and sometimes every day. But, the HEPA filter on my shop-Vac is still clean and there is virtually nothing in the base of the Shop-Vac.
Hi Michael,
1. prepare sketch,
2. buy cyclone unit
3. constract trash bin with cycline unit on top
Where do you find the cyclone unit you have there?
Cyclone on top separate saw dust and trash drop down to trash bag.
I use trash bag for collect and lift up a trash.
Nice, I do have one question though. It appears you have a trash bag lining the dust collector, does it tend to lift when your using the system?
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
1 |
K5 Repair |
2 |
Keepsake Box |
3 |
Turned Wands |
4 |
Boxes |
5 |
Turned Pipes |
6 |
Pizza Cutters |
7 |
Bookmarks |
8 |
Coffin Shelf |
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community