Kreg Owners' Community

Router table

Homemade router table (including fence with dust collection port) for new DeWalt DW618 router

  • photo
  • photo
  • photo
  • photo
  • photo

Comment

You need to be a member of Kreg Owners' Community to add comments!

Join Kreg Owners' Community

Comment by Russ Haynes on July 2, 2013 at 9:16am

Aymee -- my table was based on a design by Randall Price that you can check out on YouTube here.  I did make a few changes to the design.  For instance, I chose to make the table top and fence out of melamine.  Unfortunately, I don't have any hard plans or measurements -- I don't really use them.  I look around, see what materials I have, then let that dictate my measurements.  The base is from an old Craftsman compound mitre saw.  I built two wooden boxes the same size, joined them with three hinges on the back, added bracing to the top one, routed out an impression for my router plate in the melamine top, then mounted the router from underneath.  Good luck!

Comment by Aymee Williams on July 1, 2013 at 8:45pm

This looks exactly like something I want to build. Do you have plans or at least measurements you could give me?

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Kreg Circular Saw Track Guide Question

Hi all....Has anyone have experience using a Kreg circular saw track guide system for ripping long boards??? The boards would be 5 to 6 inches wide by 6 feet, I have a Bosch 4100 portable table saw. But ripping boards that length with a 45% angle…Continue

Started by Ed Anderson in Other Kreg® Products Oct 6.

Untitled

No Description

Started by Joe in Beginners' Zone Oct 1.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2022   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_