Kreg Owners' Community

Pine Dresser

Solid pine dresser with drawer slides.

  • photo
  • photo
  • photo

Comment

You need to be a member of Kreg Owners' Community to add comments!

Join Kreg Owners' Community

Comment by Jay Boutwell on February 23, 2011 at 5:44pm
You are most welcome, sometimes pine in not always the most friendly wood to work due to the rosin and course fibers especially across the grain.  You have done a excellent job on matering this project.  look forward to seeing more inthe future.
Comment by jonathan santagata on February 23, 2011 at 5:39pm
Thank you Jay. That thick grained pine was a little hard to work with, but worth the extra effort.
Comment by Jay Boutwell on February 23, 2011 at 12:58am
Jonathan, very nice in deed.  I definatley like your use of the pine grains in the drawer fronts.  I gives it some real personality.  The pull knobs give it just enough looks without taking away from the pine grain and they look like they belong on the dresser.  I like the side panel and the use of the legs.  Very attractive job.

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_