Comment
$1 each for a turned leg is great value, well done.
As for the finish its all down to personal taste, I prefer a finish that shows the natural beauty of the timber. I don't mind the clear satin wipe on poly.
Hello Al,
Thanks for the words of support, The pallet appeared out of nowhere one day.
I didn't have much work on and my boys are always sending me pictures of recycled work various people had done using pallets.
So as this one was of a reasonable quality to "recycle" I set to work, after three days work it reappeared as a small table as result,it looked really good so I decided to have it posted.
The turned legs I bought at the markets whilst looking for vegies, (well timber is a sort of a vegetable!!)
Any way I bought heaps of them for $1 ea so they were a "good Deal"
As for a finish,I was thinking of a variety of finishes, one was sanding to 800 1200 grit then using Tung Oil.
The other was vastly different and involved dyeing the top red and frame and legs black and painting the moulded section gold, finishing it with a gloss clear finish so it replicated a Chinese style table.
I haven't decided yet so I am open to suggestions if your interested, what do you think would be a suitable finish?
regards
Robert Brennan
Good job Robert, I really like how you recycled a timber pallet and made a great piece of furniture, did you turn the legs for table yourself. What sort of finish are planning on using.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community