Comment
Hi i'm not sure what you mean about attaching the outside frames? The bottom bench part was made as one piece and the top part all as one piece. They were then joined together with pocket holes on the inside of the sides and all along the back (with glue as well). Does that help?
Andy, I would love to have your Google Sketchup plans. I am having trouble sorting out the base of this unit and what is attached to what. Are the outside frames all the same size and then you attached the bottom base to the outside of the frames. What are the insides of the open shelves attached to? Thank you for any guidance. I am looking to build something similar this week.
Hi Anthony. This was made from Select pine boards from home depot (1 x 2, 1 x 3, 1 x 4 and 1 x 6 (for two joined together for sides). The back, base and bottom side inserts are 3/4 inch Purebond ply from Home Depot. The side trim was 1/4 inch poplar trim.
This is an awesome project. What type of wood did you use? I only ask this because I am very new to working with wood.
Hi Robert. I don't have detailed plans. I built it from a Google Sketchup plan I did and my "board planner". I have a spreadsheet where I put in all the lenghts required and it helps work out the minimum boards you need to produce it. Happy to send you the info if you add me and send me your email in a message. Regards.
Hi! Do you have plans for this?
Nice job Andy. Is that bottom section lighted? You could add some clothes hooks at the top and hang coats and dog leashes on it!
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community