Comment
I cant even imagine what a cut list would look like for this. ITS A BEAST!!!!!!! Good JOB!!
(btw.......can I get the cut list........)
I used four coats of oil based lacquer. The first gallon I bought was Valspar. I ran out so I used a gallon of Dunn Edwards lacquer because the store was closer. It is satin 20 sheen. My brother sprayed it with a combo airless/HVLP milwaukee sprayers. It worked awesome, especially for the $$.
What sort of finish did you use? It looks fantastic.
It was kind of an after-thought to honest. I posted pics of the conceptual drawings I did. The drawings vary slightly from the finished project but overall it is the same. The cabinet will be wired internally and a heavy extension cord will run over to an outlet. The router, compressor, and the charging station will be powered when in use. I still need to weld up a metal frame with casters to make it mobile. Thanks for the kind words guys, I wasn't sure how my first cabinet was going to turn out but I am pretty pleased. I learned a lot.
Great idea about that battery charging station. I have designed three different ones and none have been what I need. The idea of now having a pull out shelf in a cabinet is the next version and it seems you have beat me to it.
Thanks guys. I appreciate the feedback. I will post my drawings, its not done on SketchUp or anything but it will give you somewhat of an idea. I'll post a couple new pics. I recently built a battery charging station into a drawer above the air compressor.
Nicely done sir!! Any thoughts on putting together a set of plans? This looks like what I need to put into my fledgling shop.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community