Kreg Owners' Community

Full Sized One Sided Daybed

  • photo

Comment

You need to be a member of Kreg Owners' Community to add comments!

Join Kreg Owners' Community

Comment by Stephanie M. Williams on January 20, 2011 at 8:44pm
Thanks Rayan, I'm sue I will be taking you up on it.
Comment by Rayan Turner on January 20, 2011 at 10:17am
Hey if you need any help with it, or you have a question, you just let me know!  I am glad to share the wealth!  Once you get good at it, If you are so inclined I have a spot on my site for other folks projects and I regularly feature them right through the main feed!  I figure the more knowledge (and projects) we share...the better for everyone (except those folks who charge for it...).
Comment by Stephanie M. Williams on January 20, 2011 at 4:39am
Thanks Rayan. I downloaded it but havee yet to use it.
Comment by Rayan Turner on January 19, 2011 at 11:15pm

google sketchup.  it's free but takes a bit to get the hang of.  I have hundreds of plans drawn here: http://www.thedesignconfidential.com/plans/

There are a few lessons for sketchup when you download it, it definitely takes some practice though.

Comment by Stephanie M. Williams on January 19, 2011 at 11:12pm
What program did you use to do all of these sketches?

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_