Comment
Thanks so much Mark. Check out my home theater project build and avsforum thread. That project I really documented step-by-step.
Thanks Alan. Glad my project provided some inspiration!
Great job we put in 4 boxes but your ideas give us inspiration to take it to the next level. I love the way you finished the top edge with that profile and the way you incorporated the climbing lattice we did something similar but only on one box. Nice work.
You bet Roy. The top ledge is also 2x6 with a 2x4 cleat underneath.
Hi Roy. I came up with the design in my 3d software; however, it doesn't spit out a plan of any sort.
But you should be able to see from the construction photos how it went together. The walls were built with 2x6 cedar. The 4 outside boxes are 4x8 and the two connecting inside boxes are 4x10. Hopefully that helps.
Thanks Cindy. We will only be planting in the raised garden beds. We put rubber mulch on the inside area to make it easy on the feet and knees. I plan to top off all the beds with compost hopefully this weekend if the weather is good. Which reminds me I'll also need to finish running the smaller irrigation tubes within each bed after that too.
I would love to see this after you have it planted! Are you only planting in the raised beds or is the ground level going to be planted also? Looks beautiful!
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community