Comment
I got the basic idea on how to make it from here http://discussions.texasbowhunter.com/forums/showthread.php?t=129864 scroll down a bit and you will see it.
I don't have any formal plans, it's not hard, once you get started you'll see how it all goes together. I hardest part is to make sure the cooler sits at the right height.
I actually bought a cooler without a drain and made a hole in the bottom on onside (make sure it will be the low side on where you will put it). I found a bulkhead fitting to pass the water through the cooler. You'll find those at aquarium supply stores (or online).
This is awesome! Do you have plans for it? Would love to make one for my deck!
Thanks Carlos, I appreciate the kind words. I plan to build some more, they make great gifts and conversation pieces.
I love this project, what a great idea, imagine at parties, I'd have to explain to everyone where the cooler is. ha ha
Thanks George, I've made 2 of these. The first one I gave to my son, the second I sold to a co-worker. I'll make another to keep. Each time I make one I do something a little different. The working with the reclaimed wood is a challenge - a lot of cupping and warping makes it tough to line things up some times.
Cool !!! No wait, this is way too cool for a cooler !!! Now, I’m thirsty for an ice cold beer ... :)
Solid work output. Definitely, a sign of good craftsmanship.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community