Comment
Hello Terry, No I don't have plans. I just kind of winged it. I matched the size of the cart it is on. One thing I would do differently though; I would not make the top open and make drawers instead. Hope this helps.
The final dimension were 17x30 only because thats the size of the table top and also made it low enough to still fit under my bigger work bench so I used 1x3 pine.
Do you have plans for this?
Est-ce possible d'avoir les dimensions et quel sorte de bois que vous avez utilisé ?
looks really nice man does the jig itself fit inside when you put it away or is it permanently mounted?
Hey Rick,
Some else had suggested draws as well. That is a great idea!
I like the flip top also but How about a pullout for the tools you need while jig is in use
Very Nice Jig and I can see that it would be great to have one myself. I am looking at it along with the information you shared. I am thinking about doing myself one.
Paul-
The final dimension were 17x30 only because thats the size of the table top and also made it low enough to still fit under my bigger work bench so I used 1x3 pine.
Robert-
Good question
The only problem I ran into was the hinge because I've never done one. I had to file down the area were the hinge is, like you would do on a door. Make sure you will still be able to clamp your jig after it's in place. Also some have suggested making pull out drawers instead so the top can stay down while working. Thats sounds cool but I like the flip open idea myself. Look forward to seeing what you guys do!
Nice work. Looking to build one this weekend. Any pitfalls to watch out for?
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community