539980_10151824955160370_1054361118_n

Comment

Comment by George Santiago on July 17, 2012 at 1:16pm

Yes Eugenio. I used a very common hinge that goes on the edge or the face frame and It goes behind the door and you must drill with a "boring drill" I guess that is how they call it of I think 1 inch diameter. I bought that hinge instalation kit on woodcraft for 10 dollars. It comes with a clear template to center the drilling then you drill the back of the door as shown in some of my pictures and it is ready to go. The hinges cost 2.50 a pair or per door brand is ferrari. I use a drill press to get the holes straight evenly because a hand drill once mess up my door tearing out the wood when I miss align the drill byy accident. Good luck and thank you. 

Comment by eugenio on July 16, 2012 at 9:00am

good job,i like it very much & i plan to make like this if you don't mind,sir may i know what kind of hinges you used in this fabulous cabinet? thank you...

Comment by George Santiago on June 25, 2012 at 6:29pm

Thank your Al. No Problem Paul, I sometimes do copy. Like to look at magazines and then I combine my own Ideas and also the client ideas to get it done. I used to panels of plywood 3/4 cedar top and a 1/4 plywood cedar top. Around 4 sheets of laminate. Contact cement, sanding sealer, laquer, and so on. Total cost for that center part of the entire module was about from 150 to 200 dollars,3 days of labor and some fun. Hardest part? The laminate, specially the cabinet door sides, traspotation and instalation.

Comment by Al Barale on June 15, 2012 at 6:31pm

Excellent job George, the cabinet looks really good. Thanks for sharing your work with us. Well done.

Comment by paul casserly on June 15, 2012 at 3:52pm

Hope you don't mind if I copy this for my living room? Looks very tidy.

Comment by George Santiago on June 14, 2012 at 1:29pm

Thank you David.

Comment by David Dean on June 13, 2012 at 8:54pm

nice work