All sections installed.
Tags:
Projects: TV 3 Piece set cabinet.
Location: Vega Baja, Puerto Rico.
Comment
Yes Eugenio. I used a very common hinge that goes on the edge or the face frame and It goes behind the door and you must drill with a "boring drill" I guess that is how they call it of I think 1 inch diameter. I bought that hinge instalation kit on woodcraft for 10 dollars. It comes with a clear template to center the drilling then you drill the back of the door as shown in some of my pictures and it is ready to go. The hinges cost 2.50 a pair or per door brand is ferrari. I use a drill press to get the holes straight evenly because a hand drill once mess up my door tearing out the wood when I miss align the drill byy accident. Good luck and thank you.
good job,i like it very much & i plan to make like this if you don't mind,sir may i know what kind of hinges you used in this fabulous cabinet? thank you...
Thank your Al. No Problem Paul, I sometimes do copy. Like to look at magazines and then I combine my own Ideas and also the client ideas to get it done. I used to panels of plywood 3/4 cedar top and a 1/4 plywood cedar top. Around 4 sheets of laminate. Contact cement, sanding sealer, laquer, and so on. Total cost for that center part of the entire module was about from 150 to 200 dollars,3 days of labor and some fun. Hardest part? The laminate, specially the cabinet door sides, traspotation and instalation.
Excellent job George, the cabinet looks really good. Thanks for sharing your work with us. Well done.
Hope you don't mind if I copy this for my living room? Looks very tidy.
Thank you David.
nice work
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep.
Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community