Comment
well i do use solid oak but it to is srap it's off color oak and I get it for $ 1 a foot but there is alote more poeple buying it from B&B Door now days and I cant wait 3 to 6 mouth for it to bould up again.
i thought you had to be getting it free at that cost,,, i thought it was solid oak tho i didn't realize you were using plywood,,, i use all solid wood but for backs and bottoms of drawers
Ya Im lucky to live by a S&W cabnet shop I hit there dumpers and I got my stock build up so I dont have to pay for my cabnet gread plywood 3/4",1/2",1/4" and so I dont pass the cost on to my costumer's it dosnt seem right to change them for somthing I got for free.
i figured up what my materail cost to build this peice and i would have about $115 dollars just in the materails,,, i just don't know how you can only make this and only sale it for $70 bucks and make any money for your time,, i would have to charge at least 3 to 4 times my materail cost
Yea I have to stain twice for black but I never heard of gel stain and for this pace I acn only get 70 out of it.
yea i have to stain my pine twice most of the time too,, to get the color to come out right!! but i don't have to when i use a gel stain so much,, don't tell me you are sell this for the price you messaged me earlyer cause the higher price you said is just way to cheap in my book,, 3 to 4 times that higher price is what i would put on it out of solid oak
Thanks alote guys I just hope this is the last one in black you have to stain it 2 time's thanks again.
Very nice work, David!
David this is absolutely stunning. Very nice finish that really shows the wood grains. Like the drawer detail as it is a highlite of the front. Nice craftsmanship and attention to detail. Thank you for sharing.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community