All framing and floors, using Kreg Jig. 5 ft. X 10
Tags:
Projects: "Ketza" Camper Teardrop style camper.
Favorite of 1 person
Location: Orlando, Florida
Comment
Hello Mike, the web site to go to is: tatt.com.
Be carefully, teardrop ing is very addictive. You will spend hours on the site and everyone is very
Helpfully. Good luck and let me know how you are doing.
Rod
Where did you get the plans for this and how hard was it to register and license?
Looks great. That would work o the back of my Mazda. Where did you get the trailer and what size is it to build on? I know Harbor Freight sells small utility trailers so I'm wondering if you used one of those. Thanks, Mike
Hey John. I measured as I went as all shells are different. That being said, you can go to www.mikenchell.com and they have a ton of info and pictures of galleys on the forum. That is how I did mine as the folks there are very knowledgeable and helpful. I would look through there and spend a lot of time and ask lots of questions. Thanks for the complement. You can also see more of my photos on that web site. Have fun as these little camper are very addictive!
Rod
Hey Rod, it looks great. I have a Teardrop camper and I need to rework the galley. Can you take some close-up pictures of yours and send them to me? Any measurements would be helpful.
Thanks,
John
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community