Kreg Owners' Community

Rating:
  • Currently 0/5 stars.

Views: 259

Favorite of 1 person

Comment

You need to be a member of Kreg Owners' Community to add comments!

Join Kreg Owners' Community

Comment by steve kidd on August 8, 2011 at 12:58am
hey patrick, thats a great use of space, using the table saw fence is a great idea, hope it works very well for you.
Comment by Mike Robson on August 4, 2011 at 5:10am
thanks Patrick...my delta is the same style as yours, just different year. so I will look for an insert plate and make my own table top to mount into the saw. Yes you are right...making your own jigs/tools is just as much fun, and they always work better than store bought !
Comment by patrick in memphis(collierville) on August 3, 2011 at 10:28pm
hi mike the table saw is a delta ts350 it is not a full size table saw those are 27 deep mine is 22.no one makes a router table extension wing for my dimensions so i built it using woodsmith plan and modified dimensions.2 sheets 3/4 mdf glued then glue poplar edge banding then formica router out area for router plate insert and miter guide took a day to build but very happy with result .i can use table saw fence with a clip on sacrificial fence for router.sometimes building our equip or jigs is half the fun.
Comment by Mike Robson on August 3, 2011 at 9:49pm

did the same thing to my Delta (2000) table saw... I also have not had any stability problems. Think it helps if it has full cast table like in the picture.

?? what brand of router table is this ?? the only one I could find with a table I could cut to fit into my saw was a cheap wolfcraft (?) ...not at all happy with it.

Comment by patrick in memphis(collierville) on August 3, 2011 at 7:38pm
its been fine i removed a small steel extension wing roughly 9x22 and replaced with 22x24 router table and used mainly factory bolt holes to mount it i can now use the tablesaw fence with a sacrificial fence clipped on for the router..thanks
Comment by Al Barale on August 3, 2011 at 5:23pm
Good one Patrick, how have you found the stability of the saw since you have added the extra router wing.
Comment by patrick in memphis(collierville) on August 3, 2011 at 3:45pm
finally a router table to fit the wasted space between my fence guides .plans adjusted from woodsmith.com to fit my dimensions.

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Pantry slides for heavy application

  Recently purchased two 96" tall pantry cabinets that are 23" deep that only came with two adjustable shelves and two fixed, (one at about 55" and one at the very bottom).  Shelf holes in the walls are drilled 2" O.C.  Like most store-bought…Continue

Tags: drawer, slides, pantry, pull-out, 75-Lb

Started by Paul Coon in General Woodworking Aug 11.

Miter Saw Recommendation 1 Reply

I’m looking to upgrade my miter saw. I’m willing to invest a good amount of money to get one with the precision pocket hole joinery requires. Would anyone like to offer a recommended model?

Started by Joe Racz in Beginners' Zone. Last reply by Scott Davison Oct 6.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 8 Comments

© 2021   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_