Kreg Owners' Community

I would like to build a "Z" shaped side table for my daughter. Lots of pictures on the internet from companies selling tables, but have been unable to find any plans. Have any of you ever built one or something similar?  Thank you.

Views: 631

Reply to This

Replies to This Discussion

Homer,

Since you've received no replies to your request, and I enjoy building furniture for my daughter (and nieces) allow me to offer the following set of plans.  I have not built a table from these plans, but the plans and notes are how I would build this table.  Please forgive the drawings I use a very crude CAD program and am not a good draftsman.

Attached is the CAD drawing in pdf format and the cut list and notes in a doc format. Hopefully you can open and view these formats.  Here is the link to the prototype I used:

http://www.paraphernaliauk.com/index.php/gaya-cube-sheesham-furnitu...

Hope this helps, or at the least generates some interest in this post, Don

ps. If you build one or two from this plan please shoot me a pic and let me know of any issues you encounter.

Attachments:

Thank you so much. I had actually saved one of the pics from that website as a possible idea.  Planning to start on the table soon. I will make notes and keep you posted on how it goes.  Really appreciate your help.

Thank you so much. I had actually saved one of the pics from that website as a possible idea.  Planning to start on the table soon. I will make notes and keep you posted on how it goes.  Really appreciate your help.

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_