Here are my favorites:
1. SawStop 3HP Professional Cabinet Saw. It's a dream tool.
2. Ridgid Oscillating Sander.
3. Kreg Master Jig with Klamp Traks.
4. My custom outfeed table with Klamp Traks attached.
(see above)
5. My custom-built New Yankee router station.
6. My 16" Porter-Cable Omni dovetail jig.
Tags:
No pic's of the router table, but here's a couple i pulled outa my iPhone
Geoff, would you post photos of those tools (please include the motorcycles). The 4510 is the portable Ridgid, right? Good tool!
Geoff Simpson said:Currently? My motorcycles
That said...it's a toss up between my Ridgid 4510 Table-saw and my new Freud Router/Table combo
Steve, I got mine as a reconditioned tool from Direct Tools near Houston, TX. It cost me half as much as a new one with the same factory warranty. It's work fine. Harbor Freight has a variety of sanding drums with different grit up to 240. So, like with other sanders, you can better control the amount that you take off.
Ted
steve kidd said:
thats what i needed to know, thanks geoff. when the funds arrive i think i will get one, hope to get a hd discount coupon.
I think my favorite thing in my shop has to be a toss up between my dust collector and router table , The dust collector has made wood working so much easier since I don't have to spend nowhere near as much time cleaning up, and the router table has made making doors so much easier.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service