Kreg Owners' Community

i currently use my brothers garage or my parents porch to build my projects and just curious of the dimensions of everyones shop on here and how well the size worked for them? 

Views: 2800

Reply to This

Replies to This Discussion

12 X 16. But, if laid out correctly its efficient. I have everything I need to complete most any project. The onl item I have outside my shop is my dust collector system.

 

Hugh,


I also have a 24 X 32 shop that I built two years ago. And like you I keep my ATV in there so I had to build another 14 X 18 shed to store wood and mowers etc. When you think you have enough room oops, something else comes up.
Hugh Clare said:

I built a 24X30 detached garage and it is primarily my wood shop. I've kept just about everything mobile as I occasionally have to park my truck there. There is more than enough room for now. That may change when I've acquired all the toys, er, tools I want. :)

I just built a 24x40 shop. Havent really been able to use it, too cold. But I think the size will work out well. I have a table saw, 22" drum sander, jointer, dust collector, router table and many cabinets, benches and lots of wood storage. good luck, hope this info helps

 

Size is only relevant to the operator. I remember a hundred years ago when I had a couple power tools and worked outside to make something. Than went to a 26 X 26 garage that I shared with cars, motorcycle whatever. Than to a 24 X 40 heated shop to a 48 X 72 heated shop. But when the shops get to big other things start moving in. Like trailers and stuff. Now looking at a 40 X 80 pole shed for cold storage to free up the heated shop more.

Good luck finding the size that is right for you. Some of us might never do that.

12 x 19 always could be bigger
Attachments:
The ATVs have moved to the attached garage and the lawn and garden stuff is in a 10 X 12 behind my shop. :)

Joe Masiello said:

Hugh,


I also have a 24 X 32 shop that I built two years ago. And like you I keep my ATV in there so I had to build another 14 X 18 shed to store wood and mowers etc. When you think you have enough room oops, something else comes up.
Hugh Clare said:

I built a 24X30 detached garage and it is primarily my wood shop. I've kept just about everything mobile as I occasionally have to park my truck there. There is more than enough room for now. That may change when I've acquired all the toys, er, tools I want. :)
I had to use my carport and backyard for building anything until recently. I was able to purchase a 12 x 20 utility building and set it up as a work shop. I am in the process of insulating it. I have one wall almost done. I have built a work bench and two cabinets for benchtop bandsaw and drill press. I added a loft on both ends of the building for storage of wood and tools. It is wired with 20 amp receptacles. I am looking to purchase wood for future projects. I can tell that it is not big enough but I will make it work and be satisfied.

Mark thats not fair you sent your wife out there and scrubbed it from top to bottom .Send her this way whe she has time off

 


Mark Ruggles said:

12 x 19 always could be bigger
what do you use to heat your shop?



R Davis said:

Size is only relevant to the operator. I remember a hundred years ago when I had a couple power tools and worked outside to make something. Than went to a 26 X 26 garage that I shared with cars, motorcycle whatever. Than to a 24 X 40 heated shop to a 48 X 72 heated shop. But when the shops get to big other things start moving in. Like trailers and stuff. Now looking at a 40 X 80 pole shed for cold storage to free up the heated shop more.

Good luck finding the size that is right for you. Some of us might never do that.

I live in fl so I have an electric heater in the winter and an window air conditioner in summer.  summer is the worst.  Lots of times I move outside under shade tree.

Brandon Maxwell said:
what do you use to heat your shop?



R Davis said:

Size is only relevant to the operator. I remember a hundred years ago when I had a couple power tools and worked outside to make something. Than went to a 26 X 26 garage that I shared with cars, motorcycle whatever. Than to a 24 X 40 heated shop to a 48 X 72 heated shop. But when the shops get to big other things start moving in. Like trailers and stuff. Now looking at a 40 X 80 pole shed for cold storage to free up the heated shop more.

Good luck finding the size that is right for you. Some of us might never do that.

I use a electric heater. Also I have a kerosene heater in the shop but have not used it yet.

Brandon Maxwell said:
what do you use to heat your shop?



R Davis said:

Size is only relevant to the operator. I remember a hundred years ago when I had a couple power tools and worked outside to make something. Than went to a 26 X 26 garage that I shared with cars, motorcycle whatever. Than to a 24 X 40 heated shop to a 48 X 72 heated shop. But when the shops get to big other things start moving in. Like trailers and stuff. Now looking at a 40 X 80 pole shed for cold storage to free up the heated shop more.

Good luck finding the size that is right for you. Some of us might never do that.

I have radiant floor heat using a bosch tankless water heater with and open system then being in Wisconsin I stoke up a performer woodstove all weekend long :)

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Miter Saw Recommendation

I’m looking to upgrade my miter saw. I’m willing to invest a good amount of money to get one with the precision pocket hole joinery requires. Would anyone like to offer a recommended model?

Started by Joe Racz in Beginners' Zone on Thursday.

Miter saw stand

     Has anyone used one of the Kreg Universal Stand configurations as the base for a miter saw workstation with fold down wings?  I scrolled through the pics in the community and all I saw were using a DIY base cabinet.  I have an extra Kreg router…Continue

Tags: saw, Miter

Started by Bill Murphy in Other Kreg® Products Jun 6.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 5 Comments

© 2021   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_