Kreg Owners' Community

This question has been on my mind for a long time. When I got my Kreg Pocket Hole Jig, my first project was the workbench. At that time the HD Jig for 2x4s was not yet available. So, my question is, would/should I use the HD jig to build that workbench today? There certainly isn't any problem with my first WB, but it is 2x4s and that is what the HD was designed for.

Anybody done that yet?

Thanks, Steve

Views: 324

Reply to This

Replies to This Discussion


You should get satisfactory results using the jig you have; however, I'd use 2-1/2" long screws.

I don't have the plans in front of me, but I think that is what they call for and what I used.



When drilling pocket holes, use the required amount of spacer blocks on the jig, for the intended material thickness.

You want the screw exiting in the center of the workpiece, that you are drilling the pocket hole into.

Make sample test pieces to insure your getting adequate thread engagement.

The deeper the threads engage, the stronger joined member you'll have.

None of that was my question... My question was simply whether to use the standard jig or the HD jig which uses a larger diameter screw for 50% more strength. Since the HD jig was designed for 2x4s for benches and outdoor furniture and such, I decided to go ahead and use it. Got all the machine work done today and tomorrow I will do the assembly.

Reply to Discussion


Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 


  • Add Videos
  • View All


Recent Workbench Survey Legitimacy

Yesterday, I received an email wanting my opinion on Kreg adding high end workbenches to their product line and wanted to know before I clicked the link if this is a legitimate survey or some phishing scam. Here's the link I was provided (…Continue

Started by JOHN W. GOETZ in Other Kreg® Products Dec 10, 2021.

Pantry slides for heavy application

  Recently purchased two 96" tall pantry cabinets that are 23" deep that only came with two adjustable shelves and two fixed, (one at about 55" and one at the very bottom).  Shelf holes in the walls are drilled 2" O.C.  Like most store-bought…Continue

Tags: drawer, slides, pantry, pull-out, 75-Lb

Started by Paul Coon in General Woodworking Aug 11, 2021.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…


Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…


Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2022   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service