Kreg Owners' Community

Hi everyone, I'm new to woodworking and will be building the basic work bench. This is  the one in kreg projects plans. I would like to make it 8 feet long instead of the 4. Would I have to do  anything other then makeing the long rails and top 8 foot long? Thanks

Views: 2000

Reply to This

Replies to This Discussion

I would add in a couple of cross rails along the longer rails,

or option 2 you could always build two bases and join together.
Thanks Al, I will add two more cross rails.
I think I would add some more support in the middle also, the only thing I could see wrong with making an 8 ft table top is the mess you will be able to make before you have to stop what your doing and clean the bench off
You guys are making me rethink my plans. So bigger isn't better when it comes to a workbench! I guess all of you are working on a 4foot bench.Thanks for setting me straight.
Will, bigger isn't always bad, depends on your available space. See my bench below, it's 65" x 62". If you have the room and you built it to the height of your table saw you could use it as a out-feed table just like I did, table saw is not in the picture it's too far right to see.

see the attached, this is what i designed in google sketch and built it
Attachments:
I LOVE MY 8 FOOT BENCH, GO FOR IT


D M said:
see the attached, this is what i designed in google sketch and built it
This is becoming more then a bench it's an adventure. I'm getting a lot of great ideas. Like making the bench the same height as your table saw. DM bench frame looks like a nice start. I'm going to taking my time before I start this project and try to get all my options. When i do make it will post my picture. Thanks all, great forum.
will I was just joking about an 8ft workbench mine is 86'' long and I know what kinda mess I can make, but cleaning up is half the fun. if you have the room go for it
I have a photo of my bench on this site as a project, it is 3 metres long (about 9 foot), it is that length because that is what fits in between my shed frames, and because I got a piece of bowling alley lane very cheaply to use as a top. I had started off with a four foot bench frame as per kreg plans, with ply as a top. When I bought the piece of bowling lane, I simply added four more stretchers and two more legs to one end of the existing frame, effectively doubling its length. You can never have enough bench space, I reckon!
I think what I will do is build 2 benches. Then you can stand them together end to end or side to side as necessary and also use independently when needed.

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Rip-cut ACS plunge saw

Just got a rip-cut and installed my Bosch saw haven't used it yet but saw was a good fit. Got the original ripcut and didn't really like it had trouble cutting straight. New one has several improvements should make it work much better. especially…Continue

Started by William Burt Brown in General Woodworking Mar 17.

Is the screw driver impact drill rater?

Is the screw driver impact drill rated?Continue

Started by Bob Naylor in Beginners' Zone Mar 10.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 4 Comments

© 2021   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_