Kreg Owners' Community

Does this site contain any free woodworking plans using a Kreg Pockethole Jig?

Views: 8912

Reply to This

Replies to This Discussion

Along the right hand side "FREE Project Plans".
Hi George, there are I believe six or eight plans on the Kreg site. But you can check out www.knock-offwood.com/p/plan-index.html for hundreds of absolutely free furniture plans. I am the designer. :)
Thanks a lot Ana...........I will do just that............... Wayne
ana does have some good plans. i made a lap top tray for use in the bed or couch. turned out pretty nice. although i did use the kreg jig to make all the joints
I like your plans for bench and table. I am thinking of using your design and making from new decking material. I am considering changing the table top to the same as the bench

Ana White said:
Hi George, there are I believe six or eight plans on the Kreg site. But you can check out www.knock-offwood.com/p/plan-index.html for hundreds of absolutely free furniture plans. I am the designer. :)
Thanks John!

John A Cason II said:
ana does have some good plans. i made a lap top tray for use in the bed or couch. turned out pretty nice. although i did use the kreg jig to make all the joints
welcome ana, i will be looking through your plans once again the see what i can build next. i will be buying a house in texas so i am sure i will be buidling more stuff. lol

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Pantry slides for heavy application

  Recently purchased two 96" tall pantry cabinets that are 23" deep that only came with two adjustable shelves and two fixed, (one at about 55" and one at the very bottom).  Shelf holes in the walls are drilled 2" O.C.  Like most store-bought…Continue

Tags: drawer, slides, pantry, pull-out, 75-Lb

Started by Paul Coon in General Woodworking Aug 11.

Miter Saw Recommendation

I’m looking to upgrade my miter saw. I’m willing to invest a good amount of money to get one with the precision pocket hole joinery requires. Would anyone like to offer a recommended model?

Started by Joe Racz in Beginners' Zone Jul 22.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 8 Comments

© 2021   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_