Kreg Owners' Community


  I am wondering if anyone has used the jig on 3/4 x 3/4 stock. I'm looking

to make some grill panels for some speaker cabinets and need them to be 

removable and small.

Thank You,

Jim Shelton

Views: 640

Reply to This

Replies to This Discussion

You may be able to do it but I'm guessing there is a better way then pocket screws for something that size. Do you have a picture of something like what you are trying to do?

Here's a pic of the same cabinet I have built, I want my grill to go around the perimeter

and not block the horn.

hi, nice box, I've done some speaker boxes and the best sound came from that of 3/4" MDF, also, glue your joints because of vibrations, I hope this helps

Hello Ben,

  This picture is of a box just like mine except the tweeters, they are built with 1/2" (13 ply) Acuaro plywood .

I have folded horn subs built from the same wood light and loud no vibration. Anyways I'm looking to build the grills now

Ben Hidalgo said:

hi, nice box, I've done some speaker boxes and the best sound came from that of 3/4" MDF, also, glue your joints because of vibrations, I hope this helps

Ok I found a photo of one of my cabinets, I laid the tweeters in it

I'm just wondering if the kreg jig would hold a 3/4 x 3/4 frame together. It would screw to the box face

Well I went down today and tested out the jig on a 3/4 x 3/4 Birch Ply and it worked


  When installing screws in plywood, you may experience splitting between the laminated plys,

because the plys are being forced apart.

  Make practice pieces from scrap to see if you're getting satisfactory results.

  With some joints and their location, it will be beneficial to add glue.

Add glue to joints that will be subjected to stresses; such as vibration, twisting, turning, torquing, or the like.

When using pocket screws, a minimum of 2 is recommended at each joint, when space permits.

If one is experiencing splitting, go to a smaller diameter screw---in some cases, this will solve the splitting problem.

  Some joinery methods, when using screws, will require a pilot hole.

Reply to Discussion


Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 


  • Add Videos
  • View All


Pantry slides for heavy application

  Recently purchased two 96" tall pantry cabinets that are 23" deep that only came with two adjustable shelves and two fixed, (one at about 55" and one at the very bottom).  Shelf holes in the walls are drilled 2" O.C.  Like most store-bought…Continue

Tags: drawer, slides, pantry, pull-out, 75-Lb

Started by Paul Coon in General Woodworking Aug 11.

Miter Saw Recommendation 1 Reply

I’m looking to upgrade my miter saw. I’m willing to invest a good amount of money to get one with the precision pocket hole joinery requires. Would anyone like to offer a recommended model?

Started by Joe Racz in Beginners' Zone. Last reply by Scott Davison Oct 6.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…


Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…


Posted by Robert Ringel on September 17, 2020 at 1:48pm — 8 Comments

© 2021   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service