Wood expansion issues with table?? - Kreg Owners' Community2024-03-28T18:19:22Zhttps://kregjig.ning.com/forum/topics/wood-expansion-issues-with-table?commentId=2900167%3AComment%3A370860&feed=yes&xn_auth=noRoger if you do decide to con…tag:kregjig.ning.com,2011-11-02:2900167:Comment:3716722011-11-02T12:43:08.110Zmo khanhttps://kregjig.ning.com/profile/mokhan
Roger if you do decide to connect the top to the rails with pocket screws, leave the screws a little loose to allow for expansion. It should be fine.
Roger if you do decide to connect the top to the rails with pocket screws, leave the screws a little loose to allow for expansion. It should be fine. It's not so much dealing with…tag:kregjig.ning.com,2011-11-01:2900167:Comment:3714882011-11-01T14:04:39.011Zjustin waldronhttps://kregjig.ning.com/profile/justinwaldron
It's not so much dealing with hot and cold as it is with humidity. Remember that the most movement will be across the grain and that's where you need to allow for expansion.
It's not so much dealing with hot and cold as it is with humidity. Remember that the most movement will be across the grain and that's where you need to allow for expansion. Roger I would definitely allo…tag:kregjig.ning.com,2011-10-31:2900167:Comment:3708602011-10-31T05:33:13.757ZAl Baralehttps://kregjig.ning.com/profile/AlBarale
Roger I would definitely allow for wood movement, the amount of movement will vary but you will still have some movement that you need to deal with otherwise you end up with some sort of failure with your table.
Roger I would definitely allow for wood movement, the amount of movement will vary but you will still have some movement that you need to deal with otherwise you end up with some sort of failure with your table.