Kreg Owners' Community

How do I prevent a table I'm building from wobbling? I'm really struggling with that.

Views: 775

Reply to This

Replies to This Discussion

Dumb question.  Are all the legs the exact same length?

Yes they are. Double checked. Maybe something is not square?

You can try building some leveling legs by drilling holes in the center of the leg and using a T nut or screw in threads and threaded leveling legs. You can pick this up at your local lumbar store.

Are you sure the floor is flat?

Hi Amelia,

Several things could be causing a table to wobble. The most common issue first off, depending on where the table sits, the floor may be the issue. As for your project, make sure all the legs are cut to exact lengths. If you're off by even a 1/16" you will feel a slight wobble. Another issue may be that something is off square.  What ever the issue is, the simple fix is to buy some levelers at your local hardware store. 



Thanks everyone!

Need a picture of he table you may need corner blocks need a picture.

Don't be put off by negative replies like Matthew's

from experience I can assure you the "dumbest" question it the one that "Isn't asked"

I hope you have resolved your problem and are making good progress with your table :-)

Matthew's reply was not negative, he was stating that his own question was dumb.

meaning, most likely the legs were the same length but he was asking anyways just to make sure.

One of the slickest videos I've seen recently was the concept of using a table saw with a large table to "even up" chair legs. They basically set the blade height so just the tiniest bit of blade sticks up. Then the place the chair on the table saw so all the feet are supported, select a foot that is a good candidate for trimming, and then they run the foot across the saw sideways - back and forth - checking for stability after each pass.

That got me to thinking about building a torsion box work table - so it is dead nuts flat - and somehow installing a belt sander upside down in one of the table corners ... for the purpose of leveling even large-ish tables.

Reply to Discussion


Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 


  • Add Videos
  • View All


Recent Workbench Survey Legitimacy

Yesterday, I received an email wanting my opinion on Kreg adding high end workbenches to their product line and wanted to know before I clicked the link if this is a legitimate survey or some phishing scam. Here's the link I was provided (…Continue

Started by JOHN W. GOETZ in Other Kreg® Products Dec 10, 2021.

Pantry slides for heavy application

  Recently purchased two 96" tall pantry cabinets that are 23" deep that only came with two adjustable shelves and two fixed, (one at about 55" and one at the very bottom).  Shelf holes in the walls are drilled 2" O.C.  Like most store-bought…Continue

Tags: drawer, slides, pantry, pull-out, 75-Lb

Started by Paul Coon in General Woodworking Aug 11, 2021.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…


Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…


Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2022   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service