Kreg Owners' Community

Hi all,

I'm new to the forum and new to woodworking.  My dad left me his table saw and drill press, both 1950s vintage, but they work.  I decided that I would like to set up a workshop and get creative.  After talking to the folks at my local Woodcraft store, I bought the Kreg Master Pocket Jig System, and a Kreg DVD.

The DVD was "The Pocket Hole Solution To... Router Tables" with John Sillaots.  John recommended buying a table top rather than making one yourself, and I thought that the table top he used for this project looked nice.

My problem is, John never mentioned who makes that top, and after looking at the diagram and cut list, not one mention of the top was there either.  Well, OK, the exploded diagram has it shown in the drawing, labeled as "router table top" - but that's not much help.

I Googled around and was not able to find that top listed or pictured anywhere, never mind where to get one.  Does anyone know (assuming that you have watched the DVD or have seen the photo on the outside of the DVD case) who makes that top, or who sells it?

Thanks, and I hope that I can learn here and one day give back to the community.

Ed

 

Views: 1398

Reply to This

Replies to This Discussion

Well, I don't recall seeing that DVD but since it was produced by Kreg, I would guess it's a Kreg top.

Hi John,

I browsed Kreg's website for their Router Table Top.  What they have is different than the one in the video.  Maybe the one in the video was an older Kreg design, but was discontinued?

Ed

John Schaben said:

Well, I don't recall seeing that DVD but since it was produced by Kreg, I would guess it's a Kreg top.

Hi Ed - There are a lot of places that are making/selling router table tops. They aren't exactly rocket science to make. A couple of pieces of 3/4" MDF covered with some HPL (high pressure laminate, formica) with a hole cut into it for the router plate. IMO Woodpecker and INCRA have the best tops but they charge for them.

Ed Deckert said:

Hi John,

I browsed Kreg's website for their Router Table Top.  What they have is different than the one in the video.  Maybe the one in the video was an older Kreg design, but was discontinued?

Ed

John Schaben said:

Well, I don't recall seeing that DVD but since it was produced by Kreg, I would guess it's a Kreg top.



John Schaben said:

Hi Ed - There are a lot of places that are making/selling router table tops. They aren't exactly rocket science to make. A couple of pieces of 3/4" MDF covered with some HPL (high pressure laminate, formica) with a hole cut into it for the router plate. IMO Woodpecker and INCRA have the best tops but they charge for them.

Ed Deckert said:

Hi John,

I browsed Kreg's website for their Router Table Top.  What they have is different than the one in the video.  Maybe the one in the video was an older Kreg design, but was discontinued?

Ed

John Schaben said:

Well, I don't recall seeing that DVD but since it was produced by Kreg, I would guess it's a Kreg top.

Hi John,

 

The reply above got away from me - guess I'm not used to this forum.  After I replied to your first reply, I called Kreg just for the heck of it.  I was told that the top in the video was theirs.  (Or at least was supposed to be theirs.)

But when you compare the picture of the top that was used imaking the table in the video against the Kreg PRS1020 top, they sure look different.  Oh well, I am taking your advice to heart and may build me a top as well.  I'm not in a hurry, the shop is not even "built" yet, and I have loads of other things to get done before then.  You are right, it's not rocket science!

Thanks for the replies!

Ed

Ed Deckert said:



John Schaben said:

Hi Ed - There are a lot of places that are making/selling router table tops. They aren't exactly rocket science to make. A couple of pieces of 3/4" MDF covered with some HPL (high pressure laminate, formica) with a hole cut into it for the router plate. IMO Woodpecker and INCRA have the best tops but they charge for them.

Ed Deckert said:

Hi John,

I browsed Kreg's website for their Router Table Top.  What they have is different than the one in the video.  Maybe the one in the video was an older Kreg design, but was discontinued?

Ed

John Schaben said:

Well, I don't recall seeing that DVD but since it was produced by Kreg, I would guess it's a Kreg top.

Ill bet it is Rockler.Is it blue

Hi Jens,

No, it has a white (laminate?) surface, and the miter slot is mounted to the very front edge - it is not set-back into the table like way the current Kreg Table Top is made.  The metal slot appears to be a natural silver color like aluminum.

Ed

Hopefully this photo from an ad for the DVD comes through OK...  It's really hard to see the miter slot on the front though.

The top is a Freud.

Ed Deckert said:

Hopefully this photo from an ad for the DVD comes through OK...  It's really hard to see the miter slot on the front though.

The Kreg DVD is available from Rockler.



Mark Eaton said:

The top is a Freud.

Ed Deckert said:

Hopefully this photo from an ad for the DVD comes through OK...  It's really hard to see the miter slot on the front though.

If desired or as needed, an additional metal ''t-track'' or ''miter-slot'' bar can be added to most router table tops, work bench tops, or the like.

The tracks can be purchased separately, and cut to the desired length.

Just ''mill'' a slot, using a router bit, to the applicable dimensional width and depth, and fasten the bar in place, with screws.

A track can be located across the front, front to back, or in both directions, and as needed.

The track-bars are very handy to have on some work surfaces.

Works for me.

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_