Kreg Owners' Community

Just seeing who purchased some gifts that no one wants or who built something to last for years

Views: 7443

Attachments:

Reply to This

Replies to This Discussion

Jens,

I started with a pencil sharpener but didn't like the angle it was cutting. Finally wised up and chucked each one up in the cordless drill and ran them across a rasp clamped to the bench and then sandpaper. I think I saw a tool for that task at my favorite tool shop. May have to go invest in one before I tackle one of these again. Merry Christmas.

Yep tha'st what I was going to mention also. I no when I make my pocket plugs for some reason Kreg drill  and dowels I use are just a slightest bit off so I chuck up drill and dowel and spin it in sandpaper just to get a tiny bit of wood off.

I made several personalized name plates and signs, for family members.

Each was hand-crafted, carved, and finished.

It took up more time than I originally planned.

Ken; you may want to check out a site called stantonfurniture.com

they don't have plans, they are just a furniture web-site, but if you are looking for some Mission style furniture, this place has got some really beautiful pieces. It might be worth a look-see

 

Leonard,

The next time I go to Portland, I'll check 'em out.


leonard haag said:

Ken; you may want to check out a site called stantonfurniture.com

they don't have plans, they are just a furniture web-site, but if you are looking for some Mission style furniture, this place has got some really beautiful pieces. It might be worth a look-see

 

Built this workbench for my son-in-law.  My first Kreg project.  Nice gift for him and learning experience for me.  Applying edging to mdf can be a pain.  After several failed tests, I managed to glue and and brad gun the edging without blowing out the edge.

Attachments:

Merry Christmas to you Dave.That is a very nice looking workbench and being ii is your first project means all the more to the giver and receiver. What problem did you have with edging?

Keep projects coming we all like to see advancements in woodworking over period of time. Personaly I no my attempts have gotten better as I keep pluggin away.  (Not any pun in pluggin)

Thnaks Jens.  I appreciate your compliments.  Read that edge fastening to mdf was problematic.  How true.  It tends to split.  I was using two layers and glued and shot the 3/4 edging with a 1 1/4 brad nailer.  That worked fine.  My tests with screws and nails failed.  Probably pilot holes to small.  It all worked out and a learning experience.

David,

I wouldn't use metal fasteners for that applicaton---

potential problems later,

such as when using chisels, or equiv tools,

they'll get damaged.

I'd attached the edging with biscuits or spline joinery and glue-up.

Ken,

Thanks for the advice.  Since I don't have a biscuit joiner, I didn't think of that.  Sounds like I may have to buy another toy.  Darn!!!

David,

If you don't have a biscuit joiner, then use ''spline joinery''.

The grooves can be made with a router.


David Kessel said:

Ken,

Thanks for the advice.  Since I don't have a biscuit joiner, I didn't think of that.  Sounds like I may have to buy another toy.  Darn!!!

Built this for my grandson, christmas and 2nd birthday.

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Pantry slides for heavy application

  Recently purchased two 96" tall pantry cabinets that are 23" deep that only came with two adjustable shelves and two fixed, (one at about 55" and one at the very bottom).  Shelf holes in the walls are drilled 2" O.C.  Like most store-bought…Continue

Tags: drawer, slides, pantry, pull-out, 75-Lb

Started by Paul Coon in General Woodworking Aug 11.

Miter Saw Recommendation

I’m looking to upgrade my miter saw. I’m willing to invest a good amount of money to get one with the precision pocket hole joinery requires. Would anyone like to offer a recommended model?

Started by Joe Racz in Beginners' Zone Jul 22.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 8 Comments

© 2021   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_