What Tool Should I Get Next for My Shop? - Kreg Owners' Community2024-03-28T22:34:36Zhttps://kregjig.ning.com/forum/topics/what-tool-should-i-get-next-for-my-shop?commentId=2900167%3AComment%3A850901&feed=yes&xn_auth=no bandsaw / drum sander
bands…tag:kregjig.ning.com,2016-12-13:2900167:Comment:8532012016-12-13T20:22:33.506ZSteven Leehttps://kregjig.ning.com/profile/StevenLee
<p> bandsaw / drum sander</p>
<p></p>
<p>bandsaw has ability to resaw wood for small projects and cutting curves</p>
<p></p>
<p>drum sander can do double duty as a planer just by switching grits and if you look up planer sleds, also a jointer.</p>
<p></p>
<p> bandsaw / drum sander</p>
<p></p>
<p>bandsaw has ability to resaw wood for small projects and cutting curves</p>
<p></p>
<p>drum sander can do double duty as a planer just by switching grits and if you look up planer sleds, also a jointer.</p>
<p></p> Philip, I know this is a litt…tag:kregjig.ning.com,2016-12-13:2900167:Comment:8531462016-12-13T19:08:05.987ZPaul Leenertshttps://kregjig.ning.com/profile/PaulLeenerts
<p>Philip, I know this is a little late and you've probably already made up your mind or even purchased your next tool, but I thought I would toss in my 2 cents just in case you may find it helpful.</p>
<p></p>
<p>I've owned all of the tools you listed for quite a while and I use them all to one degree or another. That said, my go to tool from the list you posted is my band saw. I have a Grizzly 14" that I recently upgraded with the 6" riser kit so I can re-saw larger stock. I use this tool on…</p>
<p>Philip, I know this is a little late and you've probably already made up your mind or even purchased your next tool, but I thought I would toss in my 2 cents just in case you may find it helpful.</p>
<p></p>
<p>I've owned all of the tools you listed for quite a while and I use them all to one degree or another. That said, my go to tool from the list you posted is my band saw. I have a Grizzly 14" that I recently upgraded with the 6" riser kit so I can re-saw larger stock. I use this tool on nearly all of my furniture projects and have invested the time to create jigs that assist me with the accurate cuts I am looking for.</p>
<p></p>
<p>The drum sander would be my next go to tool. Since I frequently work on furniture projects I have a need to sand larger surfaces and my 18/36 is a god send.</p>
<p></p>
<p>I purchase a lot of rough lumber, so my jointer and planer are very handy also, but the tool I seem to use the least is my scroll saw. I like it, but I just don't get that many opportunities to do fine scroll work. I guess it all depends on the type of woodworking you like/need to do. Hope you found this helpful.</p> Not what i should buy BUT jus…tag:kregjig.ning.com,2016-12-13:2900167:Comment:8533622016-12-13T18:31:23.755ZNelson Howellshttps://kregjig.ning.com/profile/NelsonHowells
<p>Not what i should buy BUT just got my self a DeWalt 12 inch sliding miter saw came with a "FREE" saw horse to mount it to, couldn't resist at $299.00.</p>
<p>Not what i should buy BUT just got my self a DeWalt 12 inch sliding miter saw came with a "FREE" saw horse to mount it to, couldn't resist at $299.00.</p> I think Ken was spot-on. Alt…tag:kregjig.ning.com,2016-12-07:2900167:Comment:8522872016-12-07T07:29:20.491ZTim Gracehttps://kregjig.ning.com/profile/TimGrace26
<p>I think Ken was spot-on. Although I use my planer and jointer a lot, I upgraded my band saw from a 9 inch bench top model to a 14" floor standing (Laguna 14bx) and have been more pleased with that addition than any other tool in my shop. I can use it to resaw lumber, make band saw boxes and do quick cuts without having to knock down existing table saw set-ups. I do have blades specific to purpose as well, 1/8", 1/4" and Laguna's Resaw King.</p>
<p></p>
<p>I have pined for a drum sander, but…</p>
<p>I think Ken was spot-on. Although I use my planer and jointer a lot, I upgraded my band saw from a 9 inch bench top model to a 14" floor standing (Laguna 14bx) and have been more pleased with that addition than any other tool in my shop. I can use it to resaw lumber, make band saw boxes and do quick cuts without having to knock down existing table saw set-ups. I do have blades specific to purpose as well, 1/8", 1/4" and Laguna's Resaw King.</p>
<p></p>
<p>I have pined for a drum sander, but would have limited use. Where I see it's biggest benefit is cleaning up resawn lumber.</p> I believe I am now convinced…tag:kregjig.ning.com,2016-11-28:2900167:Comment:8510502016-11-28T14:44:21.289ZPhilip Millerhttps://kregjig.ning.com/profile/PhilipMillerFurniture
<p>I believe I am now convinced to get a band saw. I love my Grizzly Table saw. I would recommend it to anyone wanting a table saw. The only issue I have with it is the wrench that comes with the table saw to change out the blade is cheep and I would recommend replacing it as I went through two of them when changing my blades as they both bent. Grizzly was nice enough to send me replacements but they are cheaply stamped tools.</p>
<p><br></br> <br></br> <cite>Trace Farthing said:…</cite></p>
<p>I believe I am now convinced to get a band saw. I love my Grizzly Table saw. I would recommend it to anyone wanting a table saw. The only issue I have with it is the wrench that comes with the table saw to change out the blade is cheep and I would recommend replacing it as I went through two of them when changing my blades as they both bent. Grizzly was nice enough to send me replacements but they are cheaply stamped tools.</p>
<p><br/> <br/> <cite>Trace Farthing said:</cite></p>
<blockquote cite="http://kregjig.ning.com/forum/topics/what-tool-should-i-get-next-for-my-shop#2900167Comment850901"><div><div class="xg_user_generated">Considering your focus, I'd say band saw, 14" or bigger. The other tools on your list are a little more specialized and unless you plan on doing large runs, there are other ways to get good results, like using a router table for edge joining, buying dimensioned lumber, etc.<br/> <br/> For some, the band saw gets as much use as a table saw, if not more. You can rip and resaw thick stock with a lot less waste than a table saw. Talking about small projects, I've seen some great band saw boxes recently.<br/> <br/> That said, I think each of the tools on your list are necessary for a well equipped woodshop. The question is not if but when to buy the next one.<br/> <br/> I save a lot of money buying rough stock and planing it myself. Also, a drum sander would make finishing panel glue ups a lot easier.<br/> <br/> As for a scroll saw, my pick is the Excalibur 16" or 21". While I would love to have one, I doubt it would pay for itself, at least in my work.<br/> <br/> How do you like your Grizzly 1023? Would you buy it again? If not, what?</div>
</div>
</blockquote> Ken,
Thank you for your advi…tag:kregjig.ning.com,2016-11-28:2900167:Comment:8512012016-11-28T14:41:26.609ZPhilip Millerhttps://kregjig.ning.com/profile/PhilipMillerFurniture
<p>Ken,</p>
<p></p>
<p>Thank you for your advice, this was really helpful.</p>
<p></p>
<p><br></br> <br></br> <cite>Ken Darga said:</cite></p>
<blockquote cite="http://kregjig.ning.com/forum/topics/what-tool-should-i-get-next-for-my-shop#2900167Comment850784"><div><div class="xg_user_generated"><p>Phil,</p>
<p>#1 <strong>BandSaw</strong>---for cutting curves, as well as straight line cuts---short and fairluy long pieces.</p>
<p>A very handy tool, for use in any shops.</p>
<p>For long pieces, an infeed…</p>
</div>
</div>
</blockquote>
<p>Ken,</p>
<p></p>
<p>Thank you for your advice, this was really helpful.</p>
<p></p>
<p><br/> <br/> <cite>Ken Darga said:</cite></p>
<blockquote cite="http://kregjig.ning.com/forum/topics/what-tool-should-i-get-next-for-my-shop#2900167Comment850784"><div><div class="xg_user_generated"><p>Phil,</p>
<p>#1 <strong>BandSaw</strong>---for cutting curves, as well as straight line cuts---short and fairluy long pieces.</p>
<p>A very handy tool, for use in any shops.</p>
<p>For long pieces, an infeed and outfeed extension is very helpful, to support the workpiece.</p>
<p>A fence is needed for accurate straight-line cuts.</p>
<p>Buy the best that you can afford.</p>
<p>A 14" is the most useful.</p>
<p>I use blades in 1/8", 1/4", 3/8" and 1/2"---each for specific purpose.</p>
<p>Band saw blades are of a continuous loop.</p>
<p>I use mine quite a bit for cutting curves, as well as cutting small objects, when I don't need to use the tablesaw.</p>
<p></p>
<p>If you have the space in your shop, a floor model band saw is the way to go.</p>
<p>Consider mobility---a mobile caster kit can be added---so as to pull-out the machine when in use,</p>
<p>and moved back to the wall, when not in use.</p>
<p></p>
<p>Do a search on the www---peruse the advanges of a band saw.</p>
<p></p>
<p>#2 <strong>ScrollSaw</strong></p>
<p>For scroll cutting---this tool if very useful for making tight curved cuts.</p>
<p>Various blades are available---pin style and straight--- for course and fast cutting to x-fine cuts and making tight curves. (Peruse the scrollsaw blades offered by Olson, and their intended purposes).</p>
<p>Also, you w<strong>ant</strong> a model that features a variable-speed.</p>
<p></p>
<p>I do lots of scrollsaw cutting,---this tool is a must for me.</p>
<p></p>
<p>If you plan to do lots of scrollsaw cutting tasks, and changing blades frequently, you want to consider the models that feature the quick-change blade feature.</p>
<p></p>
<p>Both saws offer dust ports. Hooking up a vac, sucks up the sawdust, to prevent buildup inside the machine---a big plus.</p>
<p></p>
<p>Both types are available in floor and bench top models.</p>
<p></p>
<p>Mobility is key some me, therefore I prefer the bench-top models.</p>
<p></p>
<p>Some models feature an integral light---I find most that ae included with the machine are almost useless, because of the limited size wattage light bulb.</p>
<p></p>
<p>I use separate lights with a magnetic base and flex-neck</p>
<p>I can use them on various machines, and on my workbench---they can be quickly moved around.</p>
<p></p>
<p>Some lamp models are available with a lighted magnifier---</p>
<p>a big plus when scrollsawing and close-work, especially when using the xfine blades, and following fine lines. </p>
<p>Sometimes I follow lines less than 0.5mm wide, and use a headset magnifier.</p>
<p></p>
<p>BTW---bandsawing is faster cutting than scrollsaw cutting.</p>
<p>Scrollsaws use finer tool blades, and is slower cutting.</p>
<p></p>
<p>Lots to consider with each tool. </p>
<p>Happy shopping.</p>
<p></p>
<p>If you should have any questions, do not hesitate to contact me.</p>
<p></p>
<p></p>
<p><cite>Philip Miller said:</cite></p>
<blockquote cite="http://kregjig.ning.com/forum/topics/what-tool-should-i-get-next-for-my-shop?commentId=2900167%3AComment%3A850764&xg_source=msg_com_forum#2900167Comment850538"><div><div class="xg_user_generated"><p>Would you think a bandsaw would be better over a scroll saw?</p>
<p></p>
<p>Philip</p>
<p><br/> <br/> <cite>Ken Darga said:</cite></p>
<blockquote cite="http://kregjig.ning.com/forum/topics/what-tool-should-i-get-next-for-my-shop#2900167Comment850693"><div><div class="xg_user_generated"><p>Phil,</p>
<p>My pics, from your list, are:</p>
<p>Band Saw </p>
<p>Scroll saw.</p>
<p></p>
<p>For a joiner, my choice is a router table.</p>
<p>I 've had two joiners, a 4" and 6", got rid of both of them.</p>
<p></p>
<p>A planer is useful, if you're cleaning up lots of rough lumber,</p>
<p>and making thinner stock, such as planing 3/4" to 5/8", or the like.</p>
<p></p>
<p></p>
</div>
</div>
</blockquote>
</div>
</div>
</blockquote>
</div>
</div>
</blockquote> Considering your focus, I'd s…tag:kregjig.ning.com,2016-11-26:2900167:Comment:8509012016-11-26T04:56:13.734ZTrace Farthinghttps://kregjig.ning.com/profile/TraceFarthing
Considering your focus, I'd say band saw, 14" or bigger. The other tools on your list are a little more specialized and unless you plan on doing large runs, there are other ways to get good results, like using a router table for edge joining, buying dimensioned lumber, etc.<br />
<br />
For some, the band saw gets as much use as a table saw, if not more. You can rip and resaw thick stock with a lot less waste than a table saw. Talking about small projects, I've seen some great band saw boxes…
Considering your focus, I'd say band saw, 14" or bigger. The other tools on your list are a little more specialized and unless you plan on doing large runs, there are other ways to get good results, like using a router table for edge joining, buying dimensioned lumber, etc.<br />
<br />
For some, the band saw gets as much use as a table saw, if not more. You can rip and resaw thick stock with a lot less waste than a table saw. Talking about small projects, I've seen some great band saw boxes recently.<br />
<br />
That said, I think each of the tools on your list are necessary for a well equipped woodshop. The question is not if but when to buy the next one.<br />
<br />
I save a lot of money buying rough stock and planing it myself. Also, a drum sander would make finishing panel glue ups a lot easier.<br />
<br />
As for a scroll saw, my pick is the Excalibur 16" or 21". While I would love to have one, I doubt it would pay for itself, at least in my work.<br />
<br />
How do you like your Grizzly 1023? Would you buy it again? If not, what? Phil,
#1 BandSaw---for cuttin…tag:kregjig.ning.com,2016-11-24:2900167:Comment:8507842016-11-24T12:50:50.939ZKen Dargahttps://kregjig.ning.com/profile/KenDarga
<p>Phil,</p>
<p>#1 <strong>BandSaw</strong>---for cutting curves, as well as straight line cuts---short and fairluy long pieces.</p>
<p>A very handy tool, for use in any shops.</p>
<p>For long pieces, an infeed and outfeed extension is very helpful, to support the workpiece.</p>
<p>A fence is needed for accurate straight-line cuts.</p>
<p>Buy the best that you can afford.</p>
<p>A 14" is the most useful.</p>
<p>I use blades in 1/8", 1/4", 3/8" and 1/2"---each for specific purpose.</p>
<p>Band…</p>
<p>Phil,</p>
<p>#1 <strong>BandSaw</strong>---for cutting curves, as well as straight line cuts---short and fairluy long pieces.</p>
<p>A very handy tool, for use in any shops.</p>
<p>For long pieces, an infeed and outfeed extension is very helpful, to support the workpiece.</p>
<p>A fence is needed for accurate straight-line cuts.</p>
<p>Buy the best that you can afford.</p>
<p>A 14" is the most useful.</p>
<p>I use blades in 1/8", 1/4", 3/8" and 1/2"---each for specific purpose.</p>
<p>Band saw blades are of a continuous loop.</p>
<p>I use mine quite a bit for cutting curves, as well as cutting small objects, when I don't need to use the tablesaw.</p>
<p></p>
<p>If you have the space in your shop, a floor model band saw is the way to go.</p>
<p>Consider mobility---a mobile caster kit can be added---so as to pull-out the machine when in use,</p>
<p>and moved back to the wall, when not in use.</p>
<p></p>
<p>Do a search on the www---peruse the advanges of a band saw.</p>
<p></p>
<p>#2 <strong>ScrollSaw</strong></p>
<p>For scroll cutting---this tool if very useful for making tight curved cuts.</p>
<p>Various blades are available---pin style and straight--- for course and fast cutting to x-fine cuts and making tight curves. (Peruse the scrollsaw blades offered by Olson, and their intended purposes).</p>
<p>Also, you w<strong>ant</strong> a model that features a variable-speed.</p>
<p></p>
<p>I do lots of scrollsaw cutting,---this tool is a must for me.</p>
<p></p>
<p>If you plan to do lots of scrollsaw cutting tasks, and changing blades frequently, you want to consider the models that feature the quick-change blade feature.</p>
<p></p>
<p>Both saws offer dust ports. Hooking up a vac, sucks up the sawdust, to prevent buildup inside the machine---a big plus.</p>
<p></p>
<p>Both types are available in floor and bench top models.</p>
<p></p>
<p>Mobility is key some me, therefore I prefer the bench-top models.</p>
<p></p>
<p>Some models feature an integral light---I find most that ae included with the machine are almost useless, because of the limited size wattage light bulb.</p>
<p></p>
<p>I use separate lights with a magnetic base and flex-neck</p>
<p>I can use them on various machines, and on my workbench---they can be quickly moved around.</p>
<p></p>
<p>Some lamp models are available with a lighted magnifier---</p>
<p>a big plus when scrollsawing and close-work, especially when using the xfine blades, and following fine lines. </p>
<p>Sometimes I follow lines less than 0.5mm wide, and use a headset magnifier.</p>
<p></p>
<p>BTW---bandsawing is faster cutting than scrollsaw cutting.</p>
<p>Scrollsaws use finer tool blades, and is slower cutting.</p>
<p></p>
<p>Lots to consider with each tool. </p>
<p>Happy shopping.</p>
<p></p>
<p>If you should have any questions, do not hesitate to contact me.</p>
<p></p>
<p></p>
<p><cite>Philip Miller said:</cite></p>
<blockquote cite="http://kregjig.ning.com/forum/topics/what-tool-should-i-get-next-for-my-shop?commentId=2900167%3AComment%3A850764&xg_source=msg_com_forum#2900167Comment850538"><div><div class="xg_user_generated"><p>Would you think a bandsaw would be better over a scroll saw?</p>
<p></p>
<p>Philip</p>
<p><br/> <br/> <cite>Ken Darga said:</cite></p>
<blockquote cite="http://kregjig.ning.com/forum/topics/what-tool-should-i-get-next-for-my-shop#2900167Comment850693"><div><div class="xg_user_generated"><p>Phil,</p>
<p>My pics, from your list, are:</p>
<p>Band Saw </p>
<p>Scroll saw.</p>
<p></p>
<p>For a joiner, my choice is a router table.</p>
<p>I 've had two joiners, a 4" and 6", got rid of both of them.</p>
<p></p>
<p>A planer is useful, if you're cleaning up lots of rough lumber,</p>
<p>and making thinner stock, such as planing 3/4" to 5/8", or the like.</p>
<p></p>
<p></p>
</div>
</div>
</blockquote>
</div>
</div>
</blockquote> Would you think a bandsaw wou…tag:kregjig.ning.com,2016-11-23:2900167:Comment:8505382016-11-23T16:51:40.601ZPhilip Millerhttps://kregjig.ning.com/profile/PhilipMillerFurniture
<p>Would you think a bandsaw would be better over a scroll saw?</p>
<p></p>
<p>Philip</p>
<p><br></br> <br></br> <cite>Ken Darga said:</cite></p>
<blockquote cite="http://kregjig.ning.com/forum/topics/what-tool-should-i-get-next-for-my-shop#2900167Comment850693"><div><div class="xg_user_generated"><p>Phil,</p>
<p>My pics, from your list, are:</p>
<p>Band Saw </p>
<p>Scroll saw.</p>
<p></p>
<p>For a joiner, my choice is a router table.</p>
<p>I 've had two joiners, a 4" and 6", got rid of both of…</p>
</div>
</div>
</blockquote>
<p>Would you think a bandsaw would be better over a scroll saw?</p>
<p></p>
<p>Philip</p>
<p><br/> <br/> <cite>Ken Darga said:</cite></p>
<blockquote cite="http://kregjig.ning.com/forum/topics/what-tool-should-i-get-next-for-my-shop#2900167Comment850693"><div><div class="xg_user_generated"><p>Phil,</p>
<p>My pics, from your list, are:</p>
<p>Band Saw </p>
<p>Scroll saw.</p>
<p></p>
<p>For a joiner, my choice is a router table.</p>
<p>I 've had two joiners, a 4" and 6", got rid of both of them.</p>
<p></p>
<p>A planer is useful, if you're cleaning up lots of rough lumber,</p>
<p>and making thinner stock, such as planing 3/4" to 5/8", or the like.</p>
<p></p>
<p></p>
</div>
</div>
</blockquote> Thanks David, I like the idea…tag:kregjig.ning.com,2016-11-23:2900167:Comment:8507642016-11-23T16:50:48.615ZPhilip Millerhttps://kregjig.ning.com/profile/PhilipMillerFurniture
<p>Thanks David, I like the idea of a drum sander not sure how much I would actually use it. <br/> <br/> <cite>David Dean said:</cite></p>
<blockquote cite="http://kregjig.ning.com/forum/topics/what-tool-should-i-get-next-for-my-shop#2900167Comment850620"><div><div class="xg_user_generated"><p>If it was me Philip I would go with the drum sander if there is one thing I hate and that is sanding.</p>
</div>
</div>
</blockquote>
<p>Thanks David, I like the idea of a drum sander not sure how much I would actually use it. <br/> <br/> <cite>David Dean said:</cite></p>
<blockquote cite="http://kregjig.ning.com/forum/topics/what-tool-should-i-get-next-for-my-shop#2900167Comment850620"><div><div class="xg_user_generated"><p>If it was me Philip I would go with the drum sander if there is one thing I hate and that is sanding.</p>
</div>
</div>
</blockquote>