What is the best wood to use for a router table top? - Kreg Owners' Community2024-03-28T17:10:36Zhttps://kregjig.ning.com/forum/topics/what-is-the-best-wood-to-use-for-a-router-table-top?commentId=2900167%3AComment%3A538230&feed=yes&xn_auth=noI have a router table top tha…tag:kregjig.ning.com,2013-04-21:2900167:Comment:5382302013-04-21T02:24:46.307Zray vilehttps://kregjig.ning.com/profile/RayVile
<p>I have a router table top that I purcased from rockler, but in the future I would like to make my own router table. I think the best router table top I can imagine is made from 2 pcs of mdf 48''x48'' glued together with a laminate top that was edge in a hardwood. I would use 4 t tracks that went from side to side and end to end, I would have 2 fences facing oppisite each one with 2 router plates one each side. That way you could do doors without having to worry about changing bits. The base…</p>
<p>I have a router table top that I purcased from rockler, but in the future I would like to make my own router table. I think the best router table top I can imagine is made from 2 pcs of mdf 48''x48'' glued together with a laminate top that was edge in a hardwood. I would use 4 t tracks that went from side to side and end to end, I would have 2 fences facing oppisite each one with 2 router plates one each side. That way you could do doors without having to worry about changing bits. The base on a table that size could give you unlimited possibilities for storage for bits and etc. It would also have to be mobile and have a efficent dust collection system.</p> I used oak 3/4in plywood. Wo…tag:kregjig.ning.com,2013-04-18:2900167:Comment:5375562013-04-18T20:08:43.825ZJustinhttps://kregjig.ning.com/profile/weekendwoodwarrior
<p>I used oak 3/4in plywood. Worked great. After 3 coats of poly, the wood slides off! <a href="http://storage.ning.com/topology/rest/1.0/file/get/1935463451?profile=original" target="_self"><img width="721" src="http://storage.ning.com/topology/rest/1.0/file/get/1935463451?profile=RESIZE_1024x1024" width="721" class="align-full"/></a></p>
<p>I used oak 3/4in plywood. Worked great. After 3 coats of poly, the wood slides off! <a href="http://storage.ning.com/topology/rest/1.0/file/get/1935463451?profile=original" target="_self"><img width="721" src="http://storage.ning.com/topology/rest/1.0/file/get/1935463451?profile=RESIZE_1024x1024" width="721" class="align-full"/></a></p> Thanks for your inputs, Jay.…tag:kregjig.ning.com,2013-04-17:2900167:Comment:5375992013-04-17T18:09:28.629ZKen Dargahttps://kregjig.ning.com/profile/KenDarga
<p>Thanks for your inputs, Jay.</p>
<p>Always helpful.</p>
<p></p>
<p>I've used some of the cheaper board---the ''loosed pressed'' variety---</p>
<p>it "CRUMBLES''.</p>
<p>And--- the laminate is ''VERY'' thin---like paper thin.</p>
<p></p>
<p></p>
<p>Thanks for your inputs, Jay.</p>
<p>Always helpful.</p>
<p></p>
<p>I've used some of the cheaper board---the ''loosed pressed'' variety---</p>
<p>it "CRUMBLES''.</p>
<p>And--- the laminate is ''VERY'' thin---like paper thin.</p>
<p></p>
<p></p> When using melamine products…tag:kregjig.ning.com,2013-04-17:2900167:Comment:5376852013-04-17T15:02:12.679ZJay Boutwellhttps://kregjig.ning.com/profile/JayBoutwell
<p>When using melamine products you need to be sure to use the industrial grade. There are at least two grades of melamine one of which the cheaper is sold at the discount places and is not near as strong and wear resistance as the industrial grade. The difference being is the method of which the top coating (melamine) is applied. Some is cold rolled and some almost like painted on. The industrial grade is hot applied and pressed. Another difference is the grade of particle board that it is…</p>
<p>When using melamine products you need to be sure to use the industrial grade. There are at least two grades of melamine one of which the cheaper is sold at the discount places and is not near as strong and wear resistance as the industrial grade. The difference being is the method of which the top coating (melamine) is applied. Some is cold rolled and some almost like painted on. The industrial grade is hot applied and pressed. Another difference is the grade of particle board that it is applied to. The industrial grade is a higher density than some melamine that I have had experience with. </p>
<p>Some do nor realize that there are two different grades of particle board as well with the better knows as the hight density board while the other is just a loose pressed particle board. I use the high density in such places as building laminate covered counter tops. It is a heavier product and does not ring like plywood and loose particle board laminated countertops do. Because the high density particle board is pressed tighter it is more warp resistant than the other loose pressed board.</p>
<p> </p> Buy a melamine board from Hom…tag:kregjig.ning.com,2013-04-17:2900167:Comment:5376822013-04-17T14:25:43.718ZRuss Hayneshttps://kregjig.ning.com/profile/RussHaynes
<p>Buy a melamine board from Home Depot or Lowes. They're cheap, dimensionally stable, and pre-covered with a surface that will allow boards to slide nicely past your router bit. They sell them thick enough that routing out a recess for the router's plate won't weaken it, especially if you brace it well underneath.…<a href="http://storage.ning.com/topology/rest/1.0/file/get/1935464660?profile=original" target="_self"><img class="align-full" src="http://storage.ning.com/topology/rest/1.0/file/get/1935464660?profile=original" width="640"></img></a></p>
<p>Buy a melamine board from Home Depot or Lowes. They're cheap, dimensionally stable, and pre-covered with a surface that will allow boards to slide nicely past your router bit. They sell them thick enough that routing out a recess for the router's plate won't weaken it, especially if you brace it well underneath.<a href="http://storage.ning.com/topology/rest/1.0/file/get/1935464660?profile=original" target="_self"><img class="align-full" src="http://storage.ning.com/topology/rest/1.0/file/get/1935464660?profile=original" width="640"/></a><a href="http://storage.ning.com/topology/rest/1.0/file/get/1935466460?profile=original" target="_self"><img class="align-full" src="http://storage.ning.com/topology/rest/1.0/file/get/1935466460?profile=original" width="640"/></a><a href="http://storage.ning.com/topology/rest/1.0/file/get/1935467067?profile=original" target="_self"><img class="align-full" src="http://storage.ning.com/topology/rest/1.0/file/get/1935467067?profile=original" width="480"/></a><a href="http://storage.ning.com/topology/rest/1.0/file/get/1935468799?profile=original" target="_self"><img class="align-full" src="http://storage.ning.com/topology/rest/1.0/file/get/1935468799?profile=original" width="480"/></a></p> Alternate construction:
1 1/4…tag:kregjig.ning.com,2013-04-16:2900167:Comment:5371202013-04-16T13:04:57.548ZKen Dargahttps://kregjig.ning.com/profile/KenDarga
<p>Alternate construction:</p>
<p>1 1/4'' thick top, consisting of</p>
<p>3/4'' thick top side and a 1/2'' thick underside---</p>
<p>sandwiched together and glued, </p>
<p>a 3/4'' thick edgeband.</p>
<p></p>
<p>Alternate construction:</p>
<p>1 1/4'' thick top, consisting of</p>
<p>3/4'' thick top side and a 1/2'' thick underside---</p>
<p>sandwiched together and glued, </p>
<p>a 3/4'' thick edgeband.</p>
<p></p> Leslee,
Do a search, using th…tag:kregjig.ning.com,2013-04-15:2900167:Comment:5370582013-04-15T23:46:02.130ZKen Dargahttps://kregjig.ning.com/profile/KenDarga
<p>Leslee,</p>
<p>Do a search, using the search field, located in the upper hand corner of the page.</p>
<p>Perhaps you'll find some pertinent info.<br/> <br/> <cite>Leslee said:</cite></p>
<blockquote cite="http://kregjig.ning.com/forum/topics/what-is-the-best-wood-to-use-for-a-router-table-top#2900167Comment537043"><div class="xg_user_generated"><p> >>>.... If anyone else has any other ideas go ahead and list them. I'll write them all down...<<<</p>
</div>
</blockquote>
<p>Leslee,</p>
<p>Do a search, using the search field, located in the upper hand corner of the page.</p>
<p>Perhaps you'll find some pertinent info.<br/> <br/> <cite>Leslee said:</cite></p>
<blockquote cite="http://kregjig.ning.com/forum/topics/what-is-the-best-wood-to-use-for-a-router-table-top#2900167Comment537043"><div class="xg_user_generated"><p> >>>.... If anyone else has any other ideas go ahead and list them. I'll write them all down...<<<</p>
</div>
</blockquote> Thanks, Fellas.
I really ha…tag:kregjig.ning.com,2013-04-15:2900167:Comment:5370432013-04-15T20:05:42.746ZLesleehttps://kregjig.ning.com/profile/Leslee
<p> Thanks, Fellas.</p>
<p> I really had a hard time choosing which type of top to go with for my router table. You gave me some great ideas and some great tips. If anyone else has any other ideas go ahead and list them. I'll write them all down and later I will pick the one that is ideal for my router table.</p>
<p> Thanks, Fellas.</p>
<p> I really had a hard time choosing which type of top to go with for my router table. You gave me some great ideas and some great tips. If anyone else has any other ideas go ahead and list them. I'll write them all down and later I will pick the one that is ideal for my router table.</p> I used 2 layers of 3/4 inch b…tag:kregjig.ning.com,2013-04-15:2900167:Comment:5370402013-04-15T19:29:19.908ZRickhttps://kregjig.ning.com/profile/Rick98
<p>I used 2 layers of 3/4 inch baltic birch (13 ply), edged with hard maple, with a layer of white laminate to keep the top real smooth. I also have support structure underneath. When I glued the plywood together, I used a bunch of screws for clamping, and then removed them all.</p>
<p>I used 2 layers of 3/4 inch baltic birch (13 ply), edged with hard maple, with a layer of white laminate to keep the top real smooth. I also have support structure underneath. When I glued the plywood together, I used a bunch of screws for clamping, and then removed them all.</p> FYI---
Some time ago, I made…tag:kregjig.ning.com,2013-04-15:2900167:Comment:5369542013-04-15T17:13:06.815ZKen Dargahttps://kregjig.ning.com/profile/KenDarga
<p>FYI---</p>
<p>Some time ago, I made a work top, (2) 3/4'' thick fir plywood sheets sandwiched together---</p>
<p>later it developed a slight warp. </p>
<p>Never could get it flattened out.</p>
<p></p>
<p>Built new ones, using MDF---they're all flat and stable.</p>
<p></p>
<p>Larger work tops, (over 2'x3'), should be supported by a framed member, or the like, on the underside,</p>
<p>so as to remain ''flat''. </p>
<p></p>
<p></p>
<p>FYI---</p>
<p>Some time ago, I made a work top, (2) 3/4'' thick fir plywood sheets sandwiched together---</p>
<p>later it developed a slight warp. </p>
<p>Never could get it flattened out.</p>
<p></p>
<p>Built new ones, using MDF---they're all flat and stable.</p>
<p></p>
<p>Larger work tops, (over 2'x3'), should be supported by a framed member, or the like, on the underside,</p>
<p>so as to remain ''flat''. </p>
<p></p>
<p></p>