Kreg Owners' Community

I found this write up this morning on Family Handiman, and was wondering what it actually means in English.  I do plan on "attempting" to make some ground blinds, and will need to do framing after I learn how, but understanding this explanation might be helpful.

Lets say the one wall is 5 feet wide, and 8 feet tall.  Is a linear foot, just a foot...so would this be 5 linear feet, with me needing 5 studs.  And when it says 5 linear feet of plate material per linear feet..., does that mean 5 boards per regular foot?...total 6 boards per foot equaling 30 boards for a 5 x 8' wall???  Does plate material include the 2x4's for the roof too?  

Use this formula to order framing materials

You don’t need a math degree to estimate framing materials for walls. Here’s a formula that works every time, no matter how many doors, windows or corners your walls have:

  • One stud per linear foot of wall.
  • Five linear feet of plate material (bottoms, tops and ties) per linear foot of wall. It’ll look like too much lumber when it arrives, but you’ll need the extra stuff for corners, window and door frames, blocking and braces. Set aside the crooked stuff for short pieces.

Views: 299

Reply to This

Replies to This Discussion

You would need six 8 ft boards for studs and one 10 ft board (cut in half) to make the top & bottom plates for each 5 by 8 wall.

Check your local code to see if studs need to be 16" on center. You can always make the wall beefier by doing them 12" or 14" on center.

Reply to Discussion

RSS

Need Help?

For Technical Support, call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm (CST). 

Videos

  • Add Videos
  • View All

Forum

Edge joining 3/4 inch plywood 2 Replies

Started by Lynn Greff in Beginners' Zone. Last reply by Lynn Greff on Monday.

Where can I get a K3 owners manual.... 3 Replies

Started by John Chasse in Beginners' Zone. Last reply by John Chasse on Saturday.

HELP! Older Kreg Precision Router Fence, need parts! 1 Reply

Started by Dan Spaulding in Beginners' Zone. Last reply by Dan Spaulding May 17.

kreg production stop extension 1 Reply

Started by Pat Meeuwissen in Beginners' Zone. Last reply by Brad Martin on Tuesday.

Layout/Project Setup Table 11 Replies

Started by Todd J Michalec12@gmail.com in Beginners' Zone. Last reply by Brad Martin on Tuesday.

Product Reviews

Kreg Project Center Work Station

The Kreg Project Center is great by itself, but 2 KPC's are better than 1 when you want to set up a 12 ft. work station in a couple minutes.…

Continue

Posted by Glenn Revheim on April 5, 2018 at 5:57am — 4 Comments

Festool Domino 500

The first thing I will do is set price aside and focus on the tool and why I bought the Domino. 

      I have orders for a few dining tables and chairs.  I have made one prototype chair, while I have all the tools to make angled…

Continue

Posted by justin waldron on April 2, 2018 at 5:46am

© 2018   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_