Tags:
Well as of this morning I turn my scraps into more scraps using my Kreg Jig, table saw, sander, and locking miter bit.
Sometimes you can have more tools than common sense, and if that's the case its time to stop!
I decided to make a box for my plug cutters from scraps The result was going well until I cut open the box at the wrong angle.
After attempting to tap dance my way out of what was going to be another great box to show off I gave up and used the lo tech solution.
I shall keep the box to remind me not to spend 3 days when 10min is all that is required
First, there are good scraps, and, there are bad scraps. Just like people! You find use's for the good ones, and burn the bad ones. (kiddin).... Seriously tho, the good ones can be laminated together to create other smaller contrasting projects. I've been "savin-up" a few different ones for making some marking knives to give to friends for Christmas this year. Whoops, hope no one heard that
Most of the jigs that I build are from scraps. I also use them for test cuts, and blocks for my littel girl.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service